Acme Packet Acme Packet Certification Certification Exams Boot camp & Braindump AP0-001 Exam Dumps: Updated Questions & Answers (September 2025)

The __________ field value in the network interface configuration is used as the source IP address for ARP requests from the secondary Net-Net 4000 in a highly available pair when in the standby role.

How many simultaneous Telnet sessions does the Net-Net 4000 support in configuration mode in standard Net-Net OS version 2.x and above?

In high availability (HA) architectures, changes to the state of the Active Net-Net 4000 are queued in journals. Requests from the Standby node results in information about these changes being pulled by Standby from the Active node. The three checkpointed states are __________, __________ and __________.

A __________ is a real-time interactive voice, video or multimedia communication that is established using IP signaling protocols such as SIP, H.323 or MGCP.

Which one of the following statements about H.323 networks is FALSE?

You have copied a new Net-Net OS to the Net-Net 4000 and changed the boot parameters according to the display below. On reboot, the Net-Net 4000 is in a boot loop.

training1# check-space-remaining boot boot:

0/29702144 bytes (0%) remaining

training1# configure terminal

training1(configure)# bootparam

'.' = clear field; '-' = go to previous field; q = quit

boot device : wancom0

processor number : 0

host name :

file name : /tffs0/sd200p23.gz /tffs0/sd400q10.gz

inet on ethernet (e) : 10.0.3.11:ffff0000

inet on backplane (b) :

host inet (h) : 10.0.3.1

gateway inet (g) : 10.0.0.1

user (u) : anonymous

ftp password (pw) (blank = use rsh) : anonymous

flags (f) : 0x80008

target name (tn) : training1

startup script (s) :

other (o) :

NOTE: These changed parameters will not go into effect until reboot. Also, be aware that some boot parameters may also be changed through PHY and Network Interface Configurations.

training1(configure)# exit

training1# reboot force

Based on the information above, which three of the following scenarios could be the cause of the boot loop?

__________ establishes, modifies and removes CAM entries for packet forwarding.

Examine the output below from the network interface configuration.

When the Net-Net 4000 does not get an ARP response from the device configured as its gateway in the configured retry time period, it will____________.

Which one of the following statements about SIP is FALSE?

Which one of the following statements is TRUE when H245 tunneling is enabled on the Net-Net 4000. The Net-Net 4000 will________________.