Summer Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: dcdisc65

Page: 1 / 11
Total 108 questions
Exam Code: RCDD-002                Update: Jul 16, 2025
Exam Name: BICSI Registered Communications Distribution Designer - RCDD

BICSI BICSI Registered Communications Distribution Designer - RCDD RCDD-002 Exam Dumps: Updated Questions & Answers (July 2025)

Question # 1

What is the MINIMUM vertical separation between the top rail of a railroad track and telecommunications facilities placed beneath the track?

A.

508 mm (20 in)

B.

762 mm (30 in)

C.

1020 mm (40 in)

D.

1280 mm (50 in)

E.

1525 mm (60 in)

Question # 2

All entrance conduits should be equipped with a plastic or nylon line with a MINIMUM test rating of _________ pulling tension.

A.

22.7 kg (50 lbs)

B.

45.4 kg (100 lbs)

C.

68 kg (150 lbs)

D.

90 kg (200 lbs)

E.

113 kg (250 lbs)

Question # 3

Which one of the following is NOT an advantage of underground conduit?

A.

Has a low initial installation cost

B.

Preserves the aesthetic appearance of the premises

C.

Adaptable for future placement or removal of facilities

D.

Provides the security of additional physical cable protection

E.

Is economical over a long life

Question # 4

Buildings larger than ________ must contain a dedicated room for the termination of entrance facilities.

A.

5529 square m (60,000 square ft)

B.

7389 square m (80,000 square ft)

C.

9300 square m (100,000 square ft)

D.

11,160 square m (120,000 square ft)

E.

13,300 square m (140,000 square ft)

Question # 5

The MAXIMUM span length for an aerial entrance, from the last pole to the building, must NOT exceed:

A.

15.2 m (50 ft)

B.

30 m (100 ft)

C.

45.8 m (150 ft)

D.

61 m (200 ft)

E.

76 m (250 ft)

Question # 6

What is the connector of choice for Series 59, Series 6, and Series 11 applications?

A.

F-Style

B.

Bayonet Neill-Conncelman (BNC-Style)

C.

N-Style

D.

SMA

E.

Ultra high frequency (UHF)

Question # 7

What is the insertion loss guideline for a multimode mechanical splice?

A.

0.05 dB

B.

0.1 dB

C.

0.3 dB

D.

0.5 dB

E.

1.0 dB

Question # 8

There are three buildings approximately 400 meters apart and the customer wants to use 10 Gig Ethernet. What fiber should be specified for this application?

A.

8 - 9 micron singlemode

B.

50 micron multimode

C.

50 micron laser optimized multimode

D.

62.5 micron multimode

Question # 9

You are extending 1000 MHz video service from your existing headend to a new equipment room (ER). Your existing incoming video signal is plus (+) 15 dBmV. You have three two-way splitters with a total of minus (-) 15 dB. You are adding 122 m (400 ft) of series 11 (RG 11) cable with a minus (-) 18 dB with eight single end F-connectors with a total of minus (-) 1.2 dB. From the selections below, what is the MINIMUM gain amplifier required in the headend room?

A.

Plus (+) 15 dB

B.

Plus (+) 20 dB

C.

Plus (+) 25 dB

D.

Plus (+) 30 dB

E.

Plus (+) 35 dB

Question # 10

What type of fiber optic cable is manufactured to protect individual glass strands and is primarily designed for use inside buildings?

A.

Ribbon

B.

Tight buffered

C.

Loose tube

D.

Air blown

Page: 1 / 11
Total 108 questions

Most Popular Certification Exams

Payment

       

Contact us

dumpscollection live chat

Site Secure

mcafee secure

TESTED 16 Jul 2025