CWNP Certified Wireless IoT Solutions Administrator(2025 Edition) CWISA-103 Exam Dumps: Updated Questions & Answers (October 2025)

PtMP (Point-to-Multipoint): A single access point (AP) communicates with multiple client devices. This means the AP needs to manage how the available airtime is shared among those clients.

Airtime Fairness: Mechanisms are needed to ensure that:

Each client gets a fair chance to communicate

High-priority traffic isn't starved by low-priority traffic

PtP (Point-to-Point): A dedicated link only has two devices, eliminating the need for complex airtime management.

Considerations in Both: While interference, SINR, and frequency selection are important in both PtMP and PtP systems, the need for airtime management is unique to the multipoint scenario.

Most Vulnerable In Transit: Sensitive data (passwords, health information, etc.) is most susceptible to interception while being sent over a wireless network. Encryption is crucial at this stage.

Encryption at Rest and in Memory: While also important, these are often handled with different cryptographic techniques depending on the system.

Primary Concern: Safety: Building codes and safety regulations are there to prevent injury and accidents. This includes potential harm from improper equipment installation (falling objects, electrical hazards, etc.).

Legal and Ethical Responsibility: Organizations have an obligation to provide a safe workplace for employees and protect the well-being of end-users.

Insurance Considerations: While complying with codes may impact insurance rates, this shouldn't be the primary motivation, as safety itself is paramount.

Bottom-Up Troubleshooting: The OSI model provides a structured diagnostic approach. Starting at Layer 1 ensures basic physical connectivity issues are ruled out first.

MQTT Relies on IP: MQTT operates at a higher layer of the OSI model, relying on TCP/IP (Layers 4 and 3) for communication. Problems at the physical layer will disrupt everything built upon it.

Checking the Fundamentals: Before investigating complex application issues (MQTT), verify cables, link lights, Wi-Fi signal strength, etc.

Legacy Support: The primary reason to continue using older wireless technologies is the need to connect with devices that don't support newer standards (e.g., old sensors or equipment).

Other Reasons (Not as Strong):

Cost: Replacing legacy devices can be expensive.

Reliability: Some legacy technologies might be well-proven in specific settings.

Consumer Smart Devices Limitation: Many consumer-oriented smart devices are designed for simplicity and cost-effectiveness, leading to reliance on the crowded 2.4 GHz band.

Consequences:

High Interference: Increased potential for interference from Wi-Fi and other 2.4 GHz devices.

Limited scalability: Performance and reliability may degrade in busy wireless environments.

The concept described is Free Space Path Loss (FSPL). FSPL refers to the reduction in power density of an electromagnetic wave as it propagates through a clear, unobstructed path in free space. This weakening of the signal is due to the spreading of the wavefront as it travels, causing the power to be distributed over a larger area. The FSPL can be calculated using the Friis Transmission Equation, which shows that the received power decreases with the square of the distance from the transmitter. This concept is fundamental to understanding the behavior of RF signals in various communication systems, including wireless IoT, where the signal strength at the receiver is a critical factor for reliable data transmission.

Mesh Connectivity Depends on Signal: Mesh nodes relay data for each other. Weak signal strength between nodes can disrupt connectivity throughout the network.

Troubleshooting Signal Issues: Physically relocating affected nodes can improve their ability to form stable connections with other nodes in the mesh.

Why Other Options May Not Help:

Separate Mesh: Splits the network, not solving the root connectivity issue

Output Power: May help marginally, but significant improvement is typically achieved through repositioning.

Security Settings: Unlikely to cause connectivity issues between properly configured nodes in the same mesh.

HTTP's Popularity: HTTP is the foundation of the web, making it widely known and supported. Developers have extensive familiarity with its concepts (methods, headers, status codes, etc.).

REST APIs and Webhooks: These often leverage HTTP for communication, building upon existing knowledge and tools.

Tradeoffs:

Security: HTTP itself is not inherently secure; HTTPS or additional layers address this.

Speed: Protocols optimized for IoT may have lower overhead, but HTTP's simplicity often outweighs minor performance differences.

IEEE's Role: The Institute of Electrical and Electronics Engineers (IEEE) is a global organization critical in developing and promoting technical standards across various fields, including wireless technologies.

Standards Work: IEEE creates wireless technology standards like:

IEEE 802.11: Wi-Fi standards

IEEE 802.15.4: Basis for ZigBee, Thread, and other low-power networks

References

IEEE: https://www.ieee.org/