CWNP Certified Wireless Technician CWT-100 Exam Dumps: Updated Questions & Answers (October 2025)

You are receiving reports from several users that their clients connect with very low data rates. All reports are

confined to a particular area in the facility and the users report that the problem does not occur with the same

devices in other areas. What is most likely problem in that area?

When configuring an AP or controller, what is the collection of settings that define radio operations and the

parameters for the BSS?

An AP has two Ethernet ports on the back and another port that looks similar to an Ethernet port. For most

enterprise APs, how many of these ports can be used for Power over Ethernet (PoE)?

You are experiencing poor call quality on VoIP handsets in a specific area of the building. When you evaluate the area, you see that the strongest AP signal strength in that area is -89 dBm. All APs use Fast BSS Transition. No other roaming problem areas exist. No other call quality areas exist. The same VoIP handsets are used everywhere. What is most likely causing the call quality problems in that area?

When configuring a standalone AP with a web-based interface, what should be changed to protect the HTTP

interface used to manage the AP?

You have five APs and each AP has an average of 63 connected and active clients an any given moment.

Many users complain that throughput is poor on the WLAN. You use only channels 1, 6 and 11 in 2.4 GHz on

these APs and have configured them with a staggered channel plan. You are not using the 5 GHz radios

available in the APs. What action would have the most significant positive impact on performance?

How many channels are available in the 2.4 GHz frequency band in all regulatory domains?

Select one:

Of the following device types, which one is most likely to be used in a highly mobile (use while in motion) use

case?

At what point is RF power typically stipulated in milliwatts?

You are considering the use of an EAP method. All potential clients have been validated to support the EAP method. What other network device/location must support the EAP method for it to work?