CompTIA CompTIA A+ Core 1 Exam (2026) 220-1201 Exam Dumps: Updated Questions & Answers (July 2026)

A network switch operates at Layer 2 (Data Link Layer) of the OSI model and forwards traffic using MAC addresses. CompTIA A+ teaches that switches maintain a MAC address table, learning which devices reside on each port. When a frame arrives, the switch checks the destination MAC address and forwards it only to the appropriate port, reducing unnecessary traffic and improving performance.

Routers, on the other hand, operate at Layer 3 and forward traffic based on IP addresses, not MAC addresses. Firewalls inspect traffic for security policies and operate across multiple OSI layers but do not perform MAC-based forwarding. A gateway is a broad term that generally refers to a device connecting different networks or protocols, typically involving routing, not MAC-based switching.

Thus, the device specifically responsible for forwarding frames based on MAC address lookup is the switch.

SPF (Sender Policy Framework) is the mechanism used to verify whether a sending mail server’s IP address is authorized to send email on behalf of a specific domain. SPF works through a DNS record (typically a TXT record) published by the domain owner. When a receiving mail server gets an email claiming to be from a domain, it checks the SPF record for that domain and compares the source IP of the sending server against the list of permitted IP addresses or permitted sending services. If the IP is listed (or matches an allowed range/mechanism), SPF passes; if not, SPF fails. This directly matches the question requirement: “verify that an emailer is allowed and designated to send emails from a particular IP address.”

The other options do not focus on authorizing an IP to send mail. DKIM uses cryptographic signatures to verify message integrity and that the message was signed by a domain’s private key, not to authorize a sending IP. DMARC is a policy framework that tells receivers what to do when SPF and/or DKIM fail and adds alignment rules and reporting. CNAME is a DNS alias record and is not an email authorization control. Therefore, the correct answer is SPF.

Comprehensive and Detailed Explanation From Exact Extract (Aligned With CompTIA A+ 220-1201 Official Study Guide)

Mobile Device Management (MDM) is the technology used by organizations to centrally configure, secure, and control mobile devices such as smartphones and tablets.

The CompTIA A+ Core 1 (220-1201) objectives specify that MDM solutions allow administrators to implement and enforce security and usage policies, including:

Application control (whitelisting and blacklisting)

Restricting installation of unapproved applications

Enforcing corporate compliance requirements

Remotely managing mobile device configurations

This directly applies to the scenario: the company wants to prevent users from installing unapproved apps on corporate tablets.

MDM enforces this through:

App whitelisting → only approved apps can be installed

App blacklisting → specific apps are blocked

Locked-down app stores → only corporate-approved app stores or catalogs

This is exactly the function MDM is designed for in enterprise mobile security and management.

Why the Other Options Are Incorrect

B. ACL (Access Control List)

ACLs control network or file-system access, such as allowing or denying IP addresses, ports, or file permissions.

They cannot control app installation behavior on mobile devices.

C. DRM (Digital Rights Management)

DRM protects digital content from unauthorized copying or distribution.

It does not restrict which applications can be installed on a mobile device.

D. PAM (Privileged Access Management)

PAM controls administrative or privileged accounts in enterprise environments.

It is unrelated to app-installation restrictions on tablets.

Bluetooth is a wireless technology designed for short-range communication between devices. It is a classic example of a Personal Area Network (PAN), which supports communication between devices like smartphones, headsets, keyboards, and mice within a few meters. PANs are smaller in scope compared to LANs or WANs.

Dual-BIOS motherboards contain two firmware chips. If theprimary BIOS becomescorrupted, the system canfailover to the secondary BIOS. Most boards allow manual enabling of the secondary BIOS via a physical switch or jumper.

Option B:Downgrading firmware may not be possible if the system won’t POST or access UEFI.

Option C:Not necessary until both BIOS chips are non-functional.

Option D:Thermal paste affects heat dissipation, not BIOS/boot behavior.

CompTIA A+ Core 1 Exam Objective Reference:

Objective 3.5: Given a scenario, troubleshoot problems related to motherboards, RAM, CPU, and power.

A switch is designed to connect multiple devices within the same local network so they can communicate efficiently. In a typical LAN, a switch provides multiple Ethernet ports and forwards traffic between connected devices by using MAC addresses. When a frame enters a switch port, the switch learns the source MAC address and associates it with that port in a MAC address table. When the destination MAC is known, the switch sends the frame only out the correct port, which reduces unnecessary traffic and improves performance compared to older hub-based networks. This is exactly what is meant by allowing multiple network devices to communicate “across a single platform” (the switching fabric).

A NIC is an adapter in an endpoint device that provides network connectivity, but it does not interconnect multiple devices by itself. A firewall focuses on filtering and controlling traffic based on security rules, not primarily on providing multi-device LAN connectivity. Routers connect different networks and forward traffic based on IP addresses (Layer 3), which is not the primary device for multi-device communication within the same network segment. Therefore, the correct answer is Switch.

When a device shows asnot connectedeven though it previously paired, the most effective action is tore-pair the devices. This resets the Bluetooth connection, clears any corruption in pairing profiles, and re-establishes communication.

Option A:Entering a PIN is only relevant during initial pairing and may not be prompted again.

Option B:Turning off Wi-Fi doesn’t typically affect Bluetooth; they operate on similar frequencies but don’t conflict this way in normal use.

Option D:If Bluetooth were disabled, the device wouldn’t appear at all, not just show as “not connected.”

CompTIA A+ Core 1 Exam Objective Reference:

Objective 1.5: Given a scenario, connect and configure accessories and ports of mobile devices.

When installing copper network cable in spaces that serve as air-handling plenums, safety regulations require the use of plenum-rated cable. Suspended ceilings used for ventilation fall into this category. CompTIA A+ emphasizes that plenum spaces require cable with low-smoke, fire-resistant insulation made from specialized materials that limit toxic emissions during combustion.

Plenum-rated cabling (CMP) is designed to meet strict fire codes such as NFPA 70 (National Electrical Code). It prevents smoke-filled ventilation pathways, which could rapidly spread fire or toxic fumes throughout a building. Standard PVC-jacketed twisted pair cables are not permitted in plenum spaces because they produce thick, toxic smoke when burned.

Multimode cable refers to fiber optics, not copper cabling. Coaxial cable is used for broadband and certain RF applications but does not inherently meet plenum safety requirements unless specifically plenum-rated. Twisted pair describes the cable’s internal structure (Cat5e, Cat6, etc.), but it does not indicate the type of jacket. Only plenum-rated twisted pair is acceptable.

Therefore, the correct answer is Plenum, as it ensures compliance with safety standards and building codes, prevents hazardous conditions, and aligns with CompTIA best practices for structured cabling installations.

RAID 1 is known as mirroring. It duplicates all data to both drives simultaneously, providing redundancy in the event of a single drive failure. CompTIA A+ teaches that RAID 1 is ideal when reliability is the priority and only two drives are available exactly matching this scenario.

RAID 0 offers no redundancy. RAID 5 requires three or more drives. RAID 10 requires four or more drives.

Since the workstation has only two drives, RAID 1 is the only RAID configuration providing data protection and is heavily featured in CompTIA’s coverage of RAID technologies, their requirements, and their purposes in fault tolerance.

CompTIA A+ explains that DMARC (Domain-based Message Authentication, Reporting, and Conformance) relies on TXT DNS records to define its policies. TXT records allow administrators to publish arbitrary text-based configuration data, including DKIM and SPF policies, which DMARC references.

MX records identify mail servers, A records map IP addresses, and CNAME records create aliases none are used to store DMARC policy rules.

DMARC improves email authenticity by requiring SPF and DKIM alignment and specifying how receiving servers should handle failed validations. The A+ exam explicitly mentions TXT records as the method used for SPF, DKIM, and DMARC storage.

Therefore, the correct answer is the TXT record, which stores the policy used by DMARC to authenticate senders and prevent spoofing.

CompTIA A+ emphasizes that satellite internet connections inherently suffer from extremely high latency because the data must travel from the user ' s antenna to satellites orbiting tens of thousands of miles above Earth and back. Although satellite systems offer broad geographic coverage, this long travel distance introduces noticeable delays often 500ms or more.

Fiber, cable, and DSL operate through terrestrial wiring and have far lower latency due to short signal paths. Fiber, in particular, is the fastest and lowest-latency connection type.

Satellite delay significantly impacts VoIP calls, video conferencing, online gaming, and real-time applications. The A+ exam specifically notes latency as a major performance characteristic of satellite service, distinguishing it from other broadband technologies.

An uninterruptible power supply (UPS) protects systems against power outages by providing temporary backup power, giving users time to save data and safely shut down.

From CompTIA A+ 220-1101 Official Study Guide, Objective 3.3 – Power protection:

“A UPS supplies backup power to prevent data loss and hardware damage during outages or surges, ensuring system integrity.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 3: Power Protection

CompTIA Exam Objectives 220-1101, Domain 3.3

A smart card provides an additional factor of authentication by storing secure credentials, such as certificates, that cannot be guessed or replicated. It complements user accounts and is " something you have " .

Why Not A (Fingerprint reader): This is " something you are " , but the scenario specifically requires a physical token.

Why Not C (Secure token): Secure tokens are also valid but may not integrate as seamlessly into multi-factor authentication for physical and system access.

Why Not D (NFC scanner): An NFC scanner is a device and not a token itself; it reads cards or other credentials.

CompTIA A+ Exam Reference: Core 2 (220-1102), Section 2.5, access controls​.

An NVMe port, typically implemented through an M.2 slot, is designed specifically for NVMe-based solid-state drives (SSDs). CompTIA A+ explains that NVMe (Non-Volatile Memory Express) is a high-performance storage protocol that communicates directly with the CPU over PCIe lanes, offering significantly faster read/write speeds compared to SATA-based SSDs.

SATA drives (A) connect via SATA ports, not NVMe/M.2 PCIe slots. SAS drives (C) are enterprise-level storage devices requiring SAS controllers and are incompatible with consumer desktop motherboards. Optical drives (D) use SATA or USB interfaces and cannot be installed in an NVMe slot.

Thus, the only device designed for and compatible with an NVMe slot is a solid-state drive (SSD) using the NVMe protocol.

Comprehensive and Detailed Explanation (100–150+ words):

Secure printing ensures that print jobs are not immediately output to the tray but instead held in a secure queue. The user must enter a PIN, password, or badge authentication directly at the printer to release the job. CompTIA A+ emphasizes secure printing as the correct method for environments where sensitive information such as HR files, performance reviews, or confidential reports must not be viewed by unauthorized individuals.

Audit logging tracks usage but does not protect documents from being seen on the printer tray. Wired connectivity has no relation to security or confidentiality. Duplex is simply a printing mode.

Secure printing is widely used in corporate environments so shared devices can remain shared without compromising sensitive data. The A+ curriculum describes this as a security control that ensures confidentiality in shared-print environments, making Secure Printing the proper solution.