EMC Dell OpenManage Operate Achievement D-OME-OE-A-24 Exam Dumps: Updated Questions & Answers (October 2025)

In OpenManage Enterprise, the role with the most restrictive permissions is typically the ‘Guest’ role. This role is designed to provide the least amount of access to the system, allowing for only the most basic interaction, such as viewing certain information without the ability to make any changes.

Here’s a detailed explanation:

Viewer: This role usually allows a user to view all information within the system but does not permit any changes or management actions.

Guest: The ‘Guest’ role is more restrictive than the ‘Viewer’ role, often limited to a very minimal set of read-only access and possibly restricted to certain areas of the system.

Monitor: This role might have permissions similar to ‘Viewer’ but could also include the ability to receive alerts and notifications.

Operator: The ‘Operator’ role typically has more permissions than ‘Viewer’ or ‘Monitor’, including the ability to perform certain management tasks.

The specific permissions and roles can vary based on the version and configuration of OpenManage Enterprise. For the most accurate and up-to-date information, it is recommended to consult the official Dell OpenManage Enterprise documentation or support resources1.

=========================

Step by Step Comprehensive Detailed Explanation with ReferencesIn the OpenManage Enterprise web console, VLAN settings can be managed by navigating to the specific device and accessing its networking details. Here’s how you can manage VLAN settings:

Navigate to Devices: Start by going to the ‘Devices’ section in the OpenManage Enterprise web console.

Select a Device: Choose the device for which you want to manage VLAN settings.

View Details: Click on ‘View Details’ to access more information about the selected device.

Go to Hardware: Within the details view, navigate to the ‘Hardware’ tab.

Access Networking: Finally, select ‘Networking’ to manage VLAN settings for the device.

This path allows administrators to configure VLANs for individual devices, ensuring that network settings are tailored to the needs of each device. The process for managing VLAN settings is documented in the Dell EMC OpenManage Enterprise User’s Guide1, which provides instructions for configuring network-related settings, including VLANs.

=========================

The most likely cause of being unable to log in to the server Operating System shortly after deploying a template is that the Operating System Password was changed. When deploying a template in Dell OpenManage Enterprise, if the template includes user credentials or password settings, it may overwrite the existing credentials on the target server.

Here’s why this is the most likely cause:

The Operating System IP address was changed: While changing the IP address can affect remote connectivity, it would not prevent login once access to the server is established.

The template deployment failed: If the deployment had failed, the server would likely revert to its previous settings, including the original password.

The deployment template included RAID configuration: Configuring RAID would not typically affect the Operating System’s ability to log in unless it resulted in data loss or corruption.

The Operating System Password was changed: This directly affects the ability to log in, as the credentials used previously would no longer be valid.

It’s important to review the contents of the deployment template before applying it to ensure that any changes to user credentials are intentional and documented. For more information on the effects of template deployment on server settings, you can refer to the Dell OpenManage Enterprise documentation and community discussions1.

=========================

To enforce server configuration policies on multiple servers using different configuration profiles, one valid method is to clone an existing template. Cloning allows administrators to take a pre-existing template that closely matches the desired configuration and make necessary adjustments to create a new compliance template. Here’s how it can be done:

Access OpenManage Enterprise: Log into the OpenManage Enterprise console with administrative privileges.

Navigate to Templates: Go to the section where server templates are managed.

Select a Template: Choose an existing template that is closest to the desired configuration for the compliance policy.

Clone the Template: Use the option to clone the selected template. This will create a new template with the same configuration settings.

Modify the Template: Make any necessary changes to the cloned template to meet the specific requirements of the compliance policy.

Save the New Template: Save the newly created compliance template.

Apply the Template: Deploy the compliance template to the servers to enforce the configuration policies.

Cloning an existing template is a time-saving approach that leverages the work already done on previous configurations. It ensures consistency across server configurations and simplifies the management of multiple servers1.

For more detailed instructions on creating and managing server templates in OpenManage Enterprise, administrators can refer to the official Dell OpenManage documentation2.

In an OpenManage Enterprise environment that experiences frequent network changes, it is recommended to run Discovery tasks once per day. This frequency ensures that the inventory of devices is kept up-to-date without causing excessive network traffic that could disrupt operations.

The rationale for this recommendation is as follows:

Frequent Network Changes: Environments with frequent changes require regular updates to the device inventory to reflect the current state of the network.

Balancing Load and Currency: Running Discovery tasks too frequently (e.g., every hour) could lead to unnecessary load on the network and OpenManage Enterprise system, while running them too infrequently (e.g., weekly) might result in outdated information. Daily discovery strikes a balance between these two extremes.

Automated Scheduling: OpenManage Enterprise allows for Discovery tasks to be scheduled automatically, which can be set to occur daily to maintain an up-to-date inventory with minimal manual intervention1.

It’s important to note that the specific frequency may need to be adjusted based on the unique characteristics of the network environment, including the number of devices, the nature of the changes, and the capacity of the network infrastructure. The recommendation provided here is based on general best practices for systems management in dynamic environments.

The maximum number of static network routes that can be configured in a single-homed OpenManage Enterprise appliance is:

C. 201.

This limitation is specified in the documentation for OpenManage Enterprise, ensuring that administrators are aware of the routing capabilities and limitations when configuring network settings for the appliance1.

The SMB version setting is one that can only be configured in the Text User Interface (TUI) of the OpenManage Enterprise appliance. The TUI provides a command-line interface for the configuration and management of various settings that are not available in the graphical user interface (GUI).

Here’s why the SMB version is typically configured in the TUI:

DNS name and NTP configuration are basic network settings that are usually configurable via the GUI for ease of access and management.

Proxy settings may also be available in the GUI, as they are often required for the appliance to communicate with external services through a proxy server.

SMB version, on the other hand, pertains to the Server Message Block protocol, which is used for network file sharing. Since SMB settings can involve complex configurations and security considerations, they are often managed in the TUI to provide a more controlled environment for changes.

The use of the TUI for such configurations is documented in the Dell EMC OpenManage Enterprise User’s Guide, which details the procedures for accessing and using the TUI for various system settings1.

=========================

To upgrade OpenManage Enterprise without Internet access, you can use a Network File System (NFS) share that the appliance can access. Here’s how to perform the upgrade:

Prepare NFS Share: Set up an NFS share on a server that the OpenManage Enterprise appliance can access. Ensure that the NFS share is properly configured with the necessary permissions.

Download Update Packages: From a system with Internet access, download the update packages for OpenManage Enterprise from Dell’s official website1.

Transfer to NFS Share: Copy the downloaded update packages to the NFS share.

Access OpenManage Enterprise GUI: Log into the OpenManage Enterprise appliance’s graphical user interface (GUI).

Navigate to Update Section: Go to the update section within the GUI where you can manage appliance updates.

Specify NFS Share: Choose the option to upgrade from an NFS share and provide the path to the NFS share where the update packages are located.

Initiate Upgrade: Follow the prompts to initiate the upgrade process using the files from the NFS share.

This method allows you to upgrade the appliance in environments where direct Internet access is not available, ensuring that your OpenManage Enterprise appliance is running the latest version with all the security and functionality updates1.

For detailed instructions and best practices for upgrading OpenManage Enterprise using offline methods, refer to the official Dell documentation1.

=========================

In Dell OpenManage Enterprise, when a server is onboarded using an account that lacks administrative privileges, the status shown is “Monitored.” This status implies that the server has reduced device permissions compared to the “Managed” status, which would require administrator privileges.

Here’s a detailed explanation:

Monitored: This status indicates that the server can be contacted and discovered by OpenManage Enterprise, but the range of interactions is limited due to the lower-privileged credentials provided. The server’s operational status can be viewed, but management tasks such as power control or firmware updates cannot be executed1.

Managed with alerts: This status would imply that the server is fully managed and that alerts can be configured and received, which requires administrative privileges.

Managed: This status is assigned to servers that are fully managed with administrative credentials, allowing for a full range of management tasks.

Monitored with limited actions: While this status is not explicitly mentioned in the provided search results, it would suggest a similar level of access as “Monitored” but with some additional limited actions available.

The distinction between these statuses is important for IT administrators who need to decide the level of access and control they require over the servers. For servers that only need to be monitored without full management capabilities, providing lower-privileged credentials is a common practice.

For more information on the implications of onboarding servers with different privilege levels and the resulting statuses, you can refer to the Dell OpenManage Enterprise technical documentation

When a device on the network is identified by the OpenManage Enterprise Discovery process, the details of the device are saved in the OpenManage Enterprise (OME) database. The OME database is the central repository where all the information and configurations related to the discovered devices are stored. This includes hardware details, monitoring data, and any other relevant information that the OpenManage Enterprise system uses to manage and monitor the devices1.

The database is designed to handle a large amount of data efficiently, ensuring that all device details are readily accessible for management tasks, reporting, and analytics within the OpenManage Enterprise platform1.

For more information on the discovery process and data storage in OpenManage Enterprise, administrators can refer to the official Dell OpenManage documentation and support resources1.

=========================