HP Aruba Certified Switching Associate Exam HPE6-A72 Exam Dumps: Updated Questions & Answers (October 2025)

Use the command ping 10.1.1.254 vrf mgmt

Use the command ping 10.1.1.254/24

Change the Core-1 management address to 10.1.1.1/25 first

The destination 10.1.1.254 requires configuring a static route

Core-2(config)# ip route 0.0.0.0/0 10.1.1.1 vrf GREEN Host-B: assign the default-gateway address 10.1.20.181

Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN Host-B: assign the default-gateway address 10.1.20.181

Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN Host-B: assign the default-gateway address 10.1.20.1

Host-B: assign the default-gateway address 10.1.20.181

UDP 1812 and UDP 1813

UDP 161

TCP 443

UDP 162

netstatus

traceroute

ping

pathping

tracert

1/1/8, 1/1/10, 1/1/5-1/1/24

1/1/1-1/1/28

1/1/1-1/1/24

1/1/8-1/1/10, 1/1/5-1/1/28

Rolling back to a prior checkpoint triggers a reboot of the switch.

Stacking switches using VSF or VSX will disable the Checkpoint feature.

A checkpoint is a snapshot of the running-configuration and relevant metadata at the time the checkpoint was created.

System-generated checkpoints are created after a configuration change and 5 minutes of inactivity.

Checkpoints are available on AOS 5400R switches, as well as on all AOS-CX switches.

Core(config-if-vlan)# vrf attach Green

Core(config-if-vlan)# ip vpn-instance Green

Core(config-if-vlan)# ip vrf forwarding Green

Core(config-if-vlan)# routing-context Green vrf

Option A

Option B

Option C

Option D

SSL encryption

Scopes

Data confidentially

RADIUS groups

Access-2# configure

Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit

This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y

Access-2# configure

Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit

This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y

Access-2# configure

Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit

This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y

Access-2# configure

Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit

Access-2(config)# vsf renumber-to 2

This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y