HP Aruba Certified Network Security Associate Exam HPE6-A78 Exam Dumps: Updated Questions & Answers (October 2025)

The scenario involves an AOS-8 Mobility Controller (MC) with Control Plane Security (CPSec) enabled and auto certificate provisioning disabled. CPSec is a feature that secures the control plane communication between the MC and APs using certificates. When CPSec is enabled, APs must be authorized and trusted by the MC to become managed.

CPSec Enabled, Auto Cert Provisioning Disabled: When CPSec is enabled, APs must have a valid certificate to establish a secure control plane connection with the MC. If auto certificate provisioning is disabled (as shown in the exhibit), the MC does not automatically provision certificates to the APs. Instead, the APs must already have a factory-installed certificate (or a manually installed certificate), and the MC must trust the AP’s certificate by having the issuing CA in its trust list. Additionally, the AP must be on the MC’s AP whitelist to be authorized.

AP Whitelist: The AP whitelist is a list of authorized APs maintained on the MC (or Mobility Master, MM, if present). For an AP to become managed, its MAC address must be in the whitelist, especially when CPSec is enabled and auto provisioning is disabled. This ensures that only authorized APs can connect to the MC.

Option A, "Installing CA-signed certificates on the APs," is incorrect because HPE Aruba Networking APs, such as the 335 series, come with factory-installed certificates signed by Aruba’s CA. These certificates are sufficient for CPSec, provided the MC trusts the Aruba CA (which is typically preconfigured). Manually installing CA-signed certificates is not required unless the factory certificates are not used or trusted.

Option B, "Approving the APs as authorized APs on the AP whitelist," is correct. With CPSec enabled and auto cert provisioning disabled, the APs must be explicitly authorized by adding their MAC addresses to the AP whitelist on the MC. This step ensures that the MC accepts the AP’s certificate and allows it to become managed.

Option C, "Installing self-signed certificates on the APs," is incorrect because self-signed certificates are not typically used for CPSec. APs use factory-installed certificates, and the MC must trust the issuing CA. Self-signed certificates would require manual trust configuration on the MC, which is not a standard practice.

Option D, "Configuring a PAPI key that matches on the APs and MCs," is incorrect. PAPI (Protocol for AP Provisioning and Information) keys are used for securing communication between APs and the MC in non-CPSec environments or for specific configurations (e.g., when CPSec is disabled). When CPSec is enabled, certificate-based authentication replaces the need for a PAPI key.

The HPE Aruba Networking AOS-8 8.11 User Guide states:

"When Control Plane Security (CPSec) is enabled and auto certificate provisioning is disabled, APs must be authorized by adding their MAC addresses to the AP whitelist on the Mobility Controller (or Mobility Master). The AP uses its factory-installed certificate to establish a secure control plane connection with the MC. The MC must trust the CA that issued the AP’s certificate (e.g., Aruba’s CA), and the AP must be in the whitelist to become managed. To add an AP to the whitelist, navigate to Configuration > Access Points > AP Whitelist in the MC UI and add the AP’s MAC address." (Page 395, CPSec Configuration Section)

Additionally, the HPE Aruba Networking CPSec Deployment Guide notes:

"If auto cert provisioning is disabled, the AP whitelist becomes mandatory for CPSec. Each AP must be explicitly approved by adding its MAC address to the whitelist, ensuring that only authorized APs can connect to the MC. The AP’s factory certificate is used for authentication, and no manual certificate installation is required on the AP." (Page 12, CPSec with Manual Provisioning Section)

When managing local certificates on an ArubaOS-Switch, a recommended guideline is to create a trust anchor (TA) profile with the root CA certificate before installing the local certificate. This step ensures that the switch can verify the authenticity of the certificate chain during SSL/TLS communications. The trust anchor profile establishes a basis of trust by containing the root CA certificate, which helps validate the authenticity of any subordinate certificates, including the local certificate installed on the switch. This process is essential for enhancing security on the network, as it ensures that encrypted communications involving the switch are based on a verified certificate hierarchy.

Referring to the exhibit, the ArubaOS Mobility Controller treats HTTPS packets based on the firewall rules applied to the client. The rule that allows svc-https service for destination IP range 10.1.0.0 255.255.0.0 would permit an HTTPS packet to 10.1.10.10 since this IP address falls within the specified range. There are no rules shown that would allow traffic to the IP address 203.0.13.5; hence, the packet to this address would be dropped.

For a company that wants to deploy an open WLAN for guests with the ease of access and encryption for capable devices, using a captive portal with Opportunistic Wireless Encryption (OWE) in transition mode would be suitable. The captive portal allows for a user-friendly login page for authentication without a pre-shared key, and OWE provides encryption to protect user data without the complexities of traditional WPA or WPA2 encryption, which is ideal for guest networks. Transition mode allows devices that support OWE to use it while still allowing older or unsupported devices to connect.

In ArubaOS-CX, managing and searching logs can be crucial for tracking and diagnosing issues related to network operations such as port authentication. To efficiently find logs related to port authentication, configuring a logging filter specifically for this category is highly effective.

Logging Filter Configuration: In ArubaOS-CX, you can configure logging filters to refine the logs that are collected and viewed. By setting up a filter for the "port-access" category, you focus the logging system to only capture and display entries related to port authentication events. This approach reduces the volume of log data to sift through, making it easier to identify relevant issues.

Global Application of Filter: Applying the filter globally ensures that all relevant log messages, regardless of their origin within the switch's modules or interfaces, are captured under the specified category. This global application is crucial for comprehensive monitoring across the entire device.

Alternative Options and Their Evaluation:

Option A: Adding "-C and *-c port-access" to the "show logging" command is not a standard command format in ArubaOS-CX for filtering logs directly through the show command.

Option C: Enabling debugging for "portaccess" indeed increases the detail of logs but primarily serves to provide real-time diagnostic information rather than filtering existing logs.

Option D: Specifying a logging facility focuses on routing logs to different destinations or subsystems and does not inherently filter by log category like port-access.

WPA3-Personal enhances security over WPA2-Personal by implementing individualized data encryption. This feature, known as Wi-Fi Enhanced Open, provides each user's session with a unique encryption key, even if they are using the same network passphrase. This prevents an authenticated user from eavesdropping on the traffic of other users on the same network, thus enhancing privacy and security.

In an AOS-8 architecture with a Mobility Conductor (MC) and Mobility Controllers (MCs), the Traffic Analysis dashboard (available in the MC UI) allows administrators to monitor wireless clients’ application usage (e.g., identifying traffic from applications like Zoom, YouTube, or Skype). To enable this functionality, the MCs must be able to inspect and classify client traffic at the application level.

Firewall Visibility and DPI: The AOS-8 platform includes a stateful firewall that can perform deep packet inspection (DPI) to classify traffic based on application signatures. Enabling "firewall visibility" on the MCs activates DPI, allowing the firewall to inspect packet payloads and identify applications. This data is then used by the Traffic Analysis dashboard to display application usage statistics for wireless clients.

Option D, "Enabling firewall visibility and deep packet inspection (DPI) on the MCs," is correct. Firewall visibility must be enabled on the MCs to perform DPI and classify client traffic by application. This is typically done with the command firewall visibility in the MC configuration, which activates DPI and allows the Traffic Analysis dashboard to display application usage data.

Option A, "Configuring packet capturing on the MCs’ data plane," is incorrect. Packet capturing (e.g., using the packet-capture command) is used for manual troubleshooting or analysis, not for enabling the Traffic Analysis dashboard. Packet captures generate raw packet data, which is not processed for application usage statistics.

Option B, "Enabling logging on the users category on the MCs," is incorrect. Enabling logging for the "users" category (e.g., using the logging command) generates logs for user events (e.g., authentication, role assignment), but it does not provide application usage data for the Traffic Analysis dashboard.

Option C, "Discovering the mobility devices in HPE Aruba Networking Central," is incorrect. While discovering devices in Aruba Central can provide centralized monitoring, the Traffic Analysis dashboard in AOS-8 is a local feature on the MC and does not require Aruba Central. Additionally, application usage monitoring requires DPI on the MCs, not just device discovery.

The HPE Aruba Networking AOS-8 8.11 User Guide states:

"The Traffic Analysis dashboard on the Mobility Controller provides visibility into wireless clients’ application usage, such as identifying traffic from applications like Zoom or YouTube. To enable this feature, you must enable firewall visibility and deep packet inspection (DPI) on the MCs. Use the command firewall visibility to activate DPI, which allows the firewall to classify traffic by application. The classified data is then displayed in the Traffic Analysis dashboard under Monitoring > Traffic Analysis." (Page 360, Traffic Analysis Dashboard Section)

Additionally, the HPE Aruba Networking Security Guide notes:

"Firewall visibility on AOS-8 Mobility Controllers enables deep packet inspection (DPI) to classify client traffic by application. This is required for features like the Traffic Analysis dashboard, which displays application usage statistics for wireless clients, helping administrators monitor network activity." (Page 55, Firewall Visibility Section)

AOS-CX switches use certificates for various purposes, such as securing HTTPS access to the switch’s web interface, authenticating the switch as a RadSec client, or securing other communications. Managing local certificates on AOS-CX switches involves ensuring that the switch trusts the certificate authority (CA) that issued the certificate, which is critical for proper operation.

Option C, "Before installing the local certificate, create a trust anchor (TA) profile with the root CA certificate for the certificate that you will install," is correct. A trust anchor (TA) profile on AOS-CX switches contains the root CA certificate (or intermediate CA certificate) that issued the local certificate. This TA profile allows the switch to validate the certificate chain when the local certificate is installed. For example, if you install a CA-signed certificate for the HTTPS server, the switch needs the root CA certificate in a TA profile to trust the certificate. This is a standard guideline for certificate management on AOS-CX switches to ensure secure and proper operation.

Option A, "Understand that the switch must use the same certificate for all usages, such as its HTTPS server and RadSec client," is incorrect. AOS-CX switches support using different certificates for different purposes. For example, you can have one certificate for the HTTPS server and another for RadSec client authentication, as long as each certificate is associated with the appropriate service and trusted by the switch.

Option B, "Create a self-signed certificate online on the switch because AOS-CX switches do not support CA-signed certificates," is incorrect. AOS-CX switches fully support CA-signed certificates, and using CA-signed certificates is recommended for production environments to ensure trust and security. Self-signed certificates can be used for testing but are not a guideline for general certificate management.

Option D, "Install an Online Certificate Status Protocol (OCSP) certificate to simplify the process of enrolling and re-enrolling for certificates," is incorrect. OCSP is a protocol used to check the revocation status of certificates, not to simplify certificate enrollment. AOS-CX switches support OCSP for certificate validation, but installing an "OCSP certificate" is not a concept in certificate management, and it’s not a guideline for managing local certificates.

The HPE Aruba Networking AOS-CX 10.12 Security Guide states:

"Before installing a CA-signed local certificate on the switch, you must create a trust anchor (TA) profile that includes the root CA certificate (or intermediate CA certificate) that issued the local certificate. This ensures that the switch can validate the certificate chain. For example, to install a CA-signed certificate for the HTTPS server, use the command crypto pki ta-profile to create the TA profile, and then import the root CA certificate into the profile using crypto pki import ta-profile . Then, install the local certificate using crypto pki import local-certificate and associate it with the HTTPS server." (Page 201, Certificate Management Section)

Additionally, the guide notes:

"AOS-CX switches support both self-signed and CA-signed certificates. For production environments, it is recommended to use CA-signed certificates and ensure that the appropriate trust anchor profiles are configured to validate the certificate chain." (Page 202, Best Practices Section)

Phishing is a type of social engineering attack where an attacker impersonates a trusted entity to deceive people into providing sensitive information, such as passwords or credit card numbers. An example of phishing is when an attacker sends emails posing as a service team member or a legitimate organization with the intention of getting users to disclose their passwords or other confidential information. These emails often contain links to fake websites that look remarkably similar to legitimate ones, tricking users into entering their details.

For an ArubaOS-CX switch enforcing 802.1X on a port without any fallback options or port-access roles configured, and where the supplicant on the connected client has not completed authentication, the only type of traffic the authenticator accepts from the client is EAP (Extensible Authentication Protocol). EAP is a universal authentication framework used in 802.1X for message exchange during the authentication process. The switch allows EAP packets because they are necessary for the client and the authentication server to perform the authentication process. This is standard behavior for 802.1X authenticators, which is to permit EAP traffic to pass through even before authentication is successful to facilitate the authentication exchange. This information is supported by the IEEE 802.1X standard and ArubaOS-CX security configuration guides.