HP Advanced HPE Storage Integrator Solutions Written Exam HPE7-J02 Exam Dumps: Updated Questions & Answers (October 2025)

Detailed Explanation:

Rationale for Correct Answer:

In the exhibit, several paths show “Standby” and some appear “Dead”, while only a subset is Active (0). This typically indicates that one storage controller may be missing or offline, which reduces redundancy and can cause performance degradation. In a healthy Peer Persistence environment, both controllers should present active and non-optimized paths.

Distractors:

A & B: Having multiple active paths does not inherently reduce performance; in fact, MPIO load balances traffic. The issue here is path failures, not excessive active paths.

Key Concept: MPIO pathing in HPE Peer Persistence and controller health.

Detailed Explanation:

Rationale for Correct Answer:

HPE StoreOnce Dual Authorization prevents a single administrator from deleting, expiring, or modifying backup data. Instead, any destructive action requires approval from a second administrator, mitigating insider threats and accidental deletions. This is the correct feature for immutability protection in a replicated StoreOnce environment.

Distractors:

B (CHAP): Used for iSCSI authentication, not backup immutability.

C: Encryption protects data confidentiality, not accidental deletion.

D: Resource restrictions are policy-driven but don’t enforce dual control over destructive actions.

Key Concept: Dual Authorization for ransomware and insider-threat protection on StoreOnce.

Detailed Explanation:

Rationale for Correct Answer:

In Alletra 5000/6000 sizing, the Failure Domain Reserve (FDR) is used to account for rebuild overhead in case of drive failure. HPE best practices define that, unless otherwise directed by the sizing tool or customer requirements, the minimum FDR value should be set to 23% of the largest drive size. This ensures enough reserve capacity for fault tolerance and sustained performance during rebuilds.

Distractors:

B/C: Low-read latency is influenced by cache and workload profile, not by arbitrary FDR percentages.

D: Using the smallest drive is incorrect — rebuild impact must be sized against the largest drive.

Key Concept: FDR sizing based on 23% of largest drive = HPE best practice.

Detailed Explanation:

Rationale for Correct Answer:

HPE Alletra 6000 is a scale-out architecture array. Adding more arrays to a single scale-out group increases both performance (IOPS, throughput) and capacity, while maintaining single-pane management via HPE Data Services Cloud Console. This is the most efficient way to address both capacity growth and latency reduction for SQL workloads.

Distractors:

B: Adding NICs may help with throughput but not backend latency or capacity scaling.

C: Flash-to-cache ratios can optimize read caching but don’t fundamentally increase system-wide performance.

D: Timeless storage is a procurement/licensing option, not a performance/capacity scaling method.

Key Concept: Alletra 6000 scale-out clustering for balanced growth of capacity and performance.

Detailed Explanation:

Rationale for Correct Answer:

In B-Series (Brocade) SAN switches, trunking requires that all ports in a trunk group belong to the same port group (same ASIC) and run at the same speed. This ensures frame ordering and load balancing across ISLs.

Distractors:

A: Incorrect — cable length differences must be minimal, but not stated in meters like this.

C: Incorrect — speeds must match across all trunked ports.

D: Trunking requires a license on some Brocade models; not always enabled by default.

Key Concept: Port trunking requires same port group and same speed.

Detailed Explanation:

Rationale for Correct Answer:

Option A is correct because Fibre Channel over Ethernet (FCoE) is designed for large enterprise environments that already have Fibre Channel (FC) infrastructures but want to simplify cabling and reduce hardware by converging LAN and SAN traffic over a single Ethernet fabric. FCoE retains the efficiency, low latency, and reliability of Fibre Channel while leveraging Ethernet to minimize physical infrastructure costs. This aligns with HPE’s best practices for environments using HPE Alletra 9000/Primera or HPE Nimble arrays connected to converged networks where cost reduction and high performance are equally important.

Analysis of Incorrect Options (Distractors):

B: Real-time replication across WANs requires protocols like HPE 3PAR/Alletra Remote Copy, asynchronous/synchronous replication, or HPE Peer Persistence. FCoE is not suited for high-latency WANs because it is a LAN protocol designed for short distances within a data center.

C: For inter-data center SAN unification, FCIP (Fibre Channel over IP) or iSCSI are more suitable. FCoE does not handle long-distance high-latency links effectively.

D: A startup building AI applications with cloud workloads typically benefits from object storage (HPE Scality RING, HPE GreenLake for File and Object) or direct cloud-native APIs (S3/Blob). FCoE is irrelevant in this use case since it is on-prem and infrastructure-focused.

Key Concept:

The question is testing knowledge of FCoE and its appropriate deployment scenarios — specifically, its role in consolidating storage and network traffic inside enterprise data centers while preserving Fibre Channel protocol advantages.

Detailed Explanation:

Rationale for Correct Answer:

The SAF (Storage Assessment Framework) requires engineers to manually email the collected assessment data to HPE for processing. This is different from fully automated tools like CloudPhysics or Backup assessments that integrate directly with portals. This distinction is important for new engineers performing customer assessments.

Distractors:

A: Backup assessments are usually tool-driven (StoreOnce, RMC, etc.) and automated.

C: Non-HPE assessments are outside scope and not part of HPE standard process.

D: CloudPhysics is fully automated and cloud-based — no manual email required.

Key Concept: SAF = requires manual email submission to HPE.

Detailed Explanation:

Rationale for Correct Answer:

The choice of assessment tool (e.g., HPE CloudPhysics for VMware vs. CloudPhysics.vhdx collector for Hyper-V) depends primarily on the virtualization platform in use. VMware and Hyper-V require different collectors, and this is the deciding factor for tool selection.

Distractors:

A: Public cloud use matters for hybrid sizing but not for tool selection.

C: Expired contracts are unrelated to tool choice.

D: Procurement model (CapEx vs. GreenLake) is separate from sizing assessment.

Key Concept: Assessment tool choice = based on hypervisor platform (VMware vs Hyper-V).

Detailed Explanation:

Rationale for Correct Answer:

HPE CloudPhysics begins collecting performance and capacity data immediately after deployment of the Observer VM/collector. Some initial assessment results (e.g., environment inventory, early utilization stats) can be visible within 2 hours, while deeper trending insights require longer data collection (days/weeks).

Distractors:

B: Tokens are not required for customers to view results; reports are available via the portal.

C: Customers get a full dashboard view of results, not partial.

D: Assessments can run for longer periods (days–weeks), not fixed at 5 days.

Key Concept: CloudPhysics delivers initial insights within hours.