Huawei Huawei Certified ICT Professional - Wireless Local Area Network- Planning and Optimizing Enterprise WLAN H12-322 Exam Dumps: Updated Questions & Answers (September 2025)

-40~-65dBm

-40~-80dBm

-60~-100dBm

-80~-100dBm

True

False

1+1

2+2

1+2

3+1

WirelessMon

inSSIDer

Omnipeek

Huawei WLAN Tester

AP8030DN cannot be connected to an external antenna.

AP6610DN supports PoE power supply

AP8130DN has 4 RF ports

AP6510DN supports 11a/b/g/n/ac protocol

The field strength demand in key areas is that the main online area of ​​the user can be controlled at -40~-80dBm. If the power is too strong, it will easily lead to receiving overload, and the power is too weak.

Will cause the connection rate to drop

The interference field strength requirement is that the same-frequency interference in the same area is not more than -80dBm

The fringe field strength level combined with the receiving sensitivity and edge bandwidth requirements are generally selected above -75dBm

The leakage field strength of the system should not be too large, and the field strength at 10m of the external network of the building cannot be greater than -90dBm.

True

False

AP6510DN

AP8030DN

AP8130DN

AP9430DN

The joints on the AP/power splitter/coupler/combiner/antenna are generally N-type male heads, and the two ends of the feeder are generally N-type female heads, and the two are connected to each other.

Under normal circumstances, the indoor system or the longer distance (greater than 50 meters) uses 7/8 lines, and the tributary or short-distance transmission uses 1/2 feeders.

1/2 super soft feeder is very thin and flexible. It is generally used in the case where the gap is small or the turning angle is large.

When the actual project calculates the feeder, the short feeder can directly calculate the number of standard feeders. After the long feeder needs to confirm the routing path, reserve 10%.

~20% feeder length

WEP

TKIP

CCMP

DTLS