Huawei HCIP-Data Center Facility Deployment V2.0 H12-425_V2.0 Exam Dumps: Updated Questions & Answers (October 2025)

Web-based unified maintenance interface

Operation wizard

Quick fault locating

One-click health check

PAD

Video surveillance system

Intelligent lock

iBattery

Fingerprint

Card reader

Password

Facial recognition

Supports multiple unlocking method including access card, password, fingerprint, and facial recognition.

Supports the connection of eight access control devices and four cameras for a single smart module.

Supports the cascadingof a maximum of 4 ECC800-Pros.

Supports wizard-based deployment and commissioning.

The UPSS000-E-200K and UPS5000-E-400K use the same power module and provide the same capacity of 50 kVA but have different numbers of power modules.

For UPSs of the same model but in different power segments, their bypass module capacity is the same.

The power module capacity of both the UPS5000-S and UPS5000-E is 50 kVA. Therefore, the two types of UPS can be used together.

The power modules used in the UPSS000-S-1200K are the same as those used in the UPS5000-E-200K.

True

False

True

False

Direct ventilation air conditioning system.

DX air cooled air conditioner.

CW air cooled air conditioner.

DX water cooled air conditioner.

The parallel system capacity displayed on the LCD is 1200 kVA.

The networkingmode is set to one-to-multiple for one UPS, and set to one-to-one for the other two UPSs.

If the load is 420 kW, each of two UPSs carries 210 kW load, and the other one is standby and does not carry load.

If the load is 420 kW, each of the three UPSs carries 140kW load.

The wiring mode is incorrect, if the upstream mains input switch is turned on, the UPS will be short-circuited and damaged immediately.

The wiring mode is correct. The UPS can start properly.

The wiring mode is incorrect. The UPS cannot work in battery mode, but can still work in bypass mode or inverter mode.

The wiring mode is incorrect. The correct wiring mode should be single-phase bypass input, three-phase mains input, and one power source.