Huawei HCSE-Presales-Campus Network Planning and Design V1.0 H19-404_V1.0 Exam Dumps: Updated Questions & Answers (August 2026)

The statement is true. iMaster NCE-Campus supports multiple on-premises deployment combinations rather than being restricted exclusively to Huawei-branded physical servers and Huawei virtualization platforms. The training material explicitly lists physical-server deployment using SUSE Linux and a third-party server, as well as virtual-machine deployment using VMware.

The platform can also be deployed using Huawei server and virtualization combinations, including Huawei 2288X servers, EulerOS, FusionCompute, and TaiShan-based environments. The availability of several combinations enables customers to select an architecture consistent with their existing data-center standards, procurement strategy, virtualization environment, and operational requirements.

Huawei nevertheless identifies a recommended platform combination in the training material. A recommendation does not mean that the other listed combinations are unsupported; it identifies the preferred configuration for standardized deployment and support. The material displays third-party server plus SUSE Linux and VMware-based virtual-machine deployment as valid alternatives while recommending Huawei 2288X V5 plus EulerOS.

The deployment must still satisfy the specified CPU, memory, storage, network-interface, software-version, and compatibility requirements. Therefore, the statement is True.

==================

The two IPsec encapsulation modes are transport mode and tunnel mode. In transport mode, IPsec protects the upper-layer payload of the original IP packet while retaining the original IP header as the packet’s outer header. It is commonly associated with end-to-end host communication, although it can also protect a GRE packet between tunnel endpoints.

In tunnel mode, IPsec protects the complete original IP packet and adds a new outer IP header containing the addresses of the IPsec peers. This mode is commonly used between security gateways, routers, or site-to-site VPN endpoints because the original source and destination information can be protected within the encrypted inner packet. RFC 4301 formally defines transport and tunnel as the two IPsec security-association modes.

AH and ESP are not encapsulation modes. They are IPsec security protocols. Authentication Header provides integrity and source authentication but not encryption. Encapsulating Security Payload can provide encryption, integrity, authentication, and anti-replay protection. Either protocol can conceptually operate in transport or tunnel mode, although ESP is overwhelmingly used for encrypted enterprise VPN and SD-WAN data channels.

==================

Option C is false. The digital-map energy-saving function provides network-wide energy visibility, identifies periods of low wireless demand, and recommends appropriate energy-saving time windows. During an approved energy-saving period, selected wireless APs or radio resources can be placed into an energy-saving state after the system evaluates coverage, traffic, and capacity requirements.

Automatically powering off switches is not the intended function. Campus switches may carry essential wired services, provide uplinks for other network devices, and supply PoE power to APs, cameras, phones, sensors, and access-control systems. Automatically shutting down a complete switch could therefore interrupt many unrelated services and potentially disconnect downstream network segments.

Huawei identifies low-carbon and energy-saving operation as a characteristic of cloud campus networks and combines this objective with AI-based intelligent O & M and proactive optimization. Its intelligent O & M architecture analyzes AP load trends and performs predictive wireless-network optimization, providing the analytical foundation for selecting safe energy-saving periods and resources.

Therefore, A, B, and D describe supported digital-map energy-saving capabilities. Automatic switch power-off is the false statement, making C correct.

The intended answer is AES-256. In certification material, this question normally refers to the enhanced WPA3-Enterprise 192-bit security suite, which uses the GCMP-256 data-protection algorithm based on AES-256, together with stronger integrity and key-management components. AES-512 is not a standardized AES variant, and RC4 is the obsolete stream cipher associated with legacy WEP and TKIP-era protection rather than WPA3.

There is an important technical qualification: WPA3 is a family of certification modes, not one universal cipher suite. WPA3-Personal commonly uses Simultaneous Authentication of Equals for password-authenticated key establishment and requires CCMP-128, which is based on AES-128. WPA3-Enterprise 192-bit mode, however, uses AES-256 in GCM mode. Therefore, the original wording is broader than it should be. A technically precise version would ask which algorithm is associated with the WPA3-Enterprise 192-bit security suite. Under the intended Huawei examination scope and the supplied single-choice options, option B is correct. That distinction is crucial when interpreting this simplified examination item.

==================

The statement is true as a WLAN design recommendation. Inter-WAC roaming is supported, but it introduces more control-plane interaction and forwarding complexity than intra-WAC roaming. The Home WAC and Foreign WAC must belong to the same mobility group, synchronize station and AP information, and establish an inter-WAC CAPWAP tunnel for control information and, in some scenarios, service forwarding.

Additional synchronization, tunnel processing, route handling, and failure dependencies can increase roaming delay and complicate troubleshooting. This is especially relevant for delay-sensitive applications such as voice, video, automated guided vehicles, and real-time production systems. A better design places APs between which users frequently move under the same WAC wherever controller capacity and physical topology permit.

Avoiding inter-WAC roaming does not mean disabling the function entirely. Large campuses may require multiple WACs for scale, redundancy, or geographic distribution. Mobility groups should still be configured for unavoidable cross-controller movement. However, buildings, floors, and continuous roaming areas should be assigned carefully so that normal roaming remains intra-WAC. Therefore, the recommendation in the statement is correct, and the answer is True.

==================

APs support barcode scanning through the CloudCampus APP, DHCP Option 148–based deployment, and deployment through Huawei’s registration query center. With barcode scanning, the installer scans the AP’s label using the CloudCampus APP. The application obtains information such as the electronic serial number and MAC address, associates the AP with the correct tenant and site, and allows the AP to register with iMaster NCE.

With DHCP Option 148, the DHCP server supplies the AP with its IP configuration and the IP address and port number of iMaster NCE. The AP changes to cloud-management mode and automatically initiates registration. Huawei lists AR routers, switches, and APs as supported devices for this mode.

The registration query center can also provide the controller address after the AP contacts Huawei’s query service. It supports APs together with ARs, firewalls, and switches. Email-based deployment is primarily an SD-WAN CPE or AR-router ZTP method, not an AP deployment mode. Therefore, A, C, and D are correct.

==================

A-FEC, or Adaptive Forward Error Correction, is the correct technology. It protects delay-sensitive traffic by adding calculated redundant packets to the original packet stream. If some original packets are lost during WAN transmission, the receiving edge device can reconstruct them using the surviving original and redundant packets rather than waiting for end-to-end retransmission.

The key distinction between ordinary FEC and A-FEC is adaptation. With A-FEC, the receiving device reports real-time packet-loss and continuous-loss information to the transmitting device through FEC acknowledgement messages. The transmitting edge then dynamically increases or decreases the redundancy ratio according to actual network conditions. This provides stronger recovery during severe loss while avoiding unnecessary bandwidth overhead when link quality improves. Huawei describes this feedback-controlled adjustment as a mechanism that can alleviate or eliminate the impact of packet loss.

IFIT and IPCA are primarily measurement and service-quality analysis technologies; they do not reconstruct lost video packets. Fixed FEC does not adapt its redundancy level as effectively to changing loss conditions. Therefore, the technology intended for smooth video under packet loss of up to 20% is A-FEC.

==================

The distinguishing function supported by the AR6177 is VDSL. VDSL, or Very-high-bit-rate Digital Subscriber Line, enables a branch router to obtain WAN connectivity over existing copper telephone infrastructure. It is appropriate for small branches and distributed sites where Ethernet private lines, fiber, or mobile connections are unavailable or commercially impractical.

The AR6177 can terminate the VDSL access circuit and provide routing, NAT, DHCP, VPN, and other branch-gateway functions for the connected LAN. In this single-answer question, Wi-Fi and PoE are not the defining integrated capabilities of the AR6177 model. Similarly, the complete combination of IPS, antivirus, and URL filtering belongs to a security-enhanced product profile rather than the function used to distinguish the AR6177.

Huawei’s campus design material recognizes DSL links as a specific WAN-access category and notes that deployments involving complex or low-speed links, including DSL, may require an appropriate branch-device deployment method. The model is therefore selected when direct VDSL-based WAN access is required. Consequently, VDSL is the supported capability intended by this question, and option C is correct.

==================

Broadcast TWT, Individual TWT, and Implicit TWT are valid Target Wake Time concepts. Individual TWT establishes a wake schedule between an AP and a specific station. Broadcast TWT advertises scheduling information that multiple stations can use, reducing individual negotiation overhead and coordinating groups of devices. An implicit TWT agreement defines a repeating schedule in which subsequent wake times are calculated from the agreed wake interval instead of being renegotiated for every service period.

These mechanisms allow stations, particularly battery-powered IoT devices, to sleep for predictable periods and wake only when transmission or reception is scheduled. TWT consequently reduces power consumption, channel contention, collisions, and unnecessary medium access in dense WLAN environments. Research describing IEEE 802.11ax TWT confirms that the mechanism schedules station transmission periods and allows stations to remain asleep outside their negotiated service periods.

“Multicast TWT” is not one of the standard TWT concepts represented by this question. Broadcast scheduling can cover multiple stations, but that does not create a separate mechanism formally identified here as Multicast TWT. Therefore, the correct answers are A, B, and C.

==================

AR routers support registration query center–based deployment, email-based deployment, and DHCP Option 148–based deployment. In registration query center deployment, the router obtains basic network connectivity, resolves or contacts Huawei’s registration service, retrieves the address and port of iMaster NCE, and then initiates registration. Huawei identifies AR routers, firewalls, switches, and APs as applicable devices for this method.

Email-based deployment is a major SD-WAN ZTP method for AR routers operating as CPEs. An administrator creates the site and ZTP configuration on iMaster NCE and sends a deployment URL to the onsite engineer. After the URL is opened and the parameters are written to the router, the device connects to the WAN and automatically registers with the controller.

DHCP Option 148 can provide the controller’s southbound IP address and port number to an IPv4 AR router, enabling automatic registration. Barcode scanning through the CloudCampus APP is specifically presented as an AP onboarding method, not an AR-router deployment method. Therefore, A, C, and D are correct.