LPI LPIC-1 Exam 102, Part 2 of 2, version 5.0 102-500 Exam Dumps: Updated Questions & Answers (October 2025)

The printers.conf file inside the CUPS configuration directory contains the definition of the printers. It is a text file that lists the names, locations, descriptions, and options for each printer queue. Each printer queue has a corresponding or section in the file. The file is normally located in the /etc/cups directory and is automatically updated by the cupsd (8) daemon when printers are added or modified. The file can also be edited manually, but the changes will not take effect until the cupsd daemon is restarted or the command cupsctl --reload-config is issued. References:

cups-files.conf - file and directory configuration file for cups

[printers.conf - printer configuration file for cups]

The command that must be run in order to ensure the MTA knows about the new email alias is:

newaliases

This command updates the MTA’s aliases database and makes the changes effective. It is equivalent to the commands sendmail -bi or sendmail -I12. The newaliases command should be run after making modifications to the /etc/aliases file, which contains the email aliases for the system3.

The ntpdate command is a tool used to synchronize the system date and time with the NTP (Network Time Protocol) server(s) specified as arguments. It can be run manually as necessary to set the system clock, or it can be run from a cron script to periodically update the system clock. The ntpdate command has the following syntax:

ntpdate [options] server [server ...]

The ntpdate command obtains a number of samples from each server and applies a subset of the NTP clock filter and selection algorithms to select the best one. It then adjusts the system clock either by stepping it (if the offset is larger than 0.5 seconds) or by slewing it (if the offset is smaller than 0.5 seconds). The ntpdate command can also be used to query the date and time from a server without setting the system clock by using the -q option.

The other statements are false because:

It is not the primary management command for the NTP time server. The primary management command for the NTP time server is ntpd, which is a daemon that runs continuously and disciplines the system clock using sophisticated algorithms.

It updates both the local system’s date and time, not just the date. The ntpdate command sets the system date and time according to the configured timezone information.

It does not send the local system time to any remote NTP time servers. The ntpdate command only queries the time from the servers and does not transmit any time information to them.

It cannot be used by any user to set the user clock independently of the system clock. The ntpdate command must be run as root on the local host and it affects the system clock for all users.

References:

Linux ntpdate Command Tutorial – LinuxTect

ntpdate - set the date and time via NTP

How to Use NTPDATE to Sync Time in Ubuntu Linux? – TheITBros

The sendmail command is a generic interface to various mail transfer agents (MTAs), such as Sendmail, Postfix, Exim, Qmail, etc. The sendmail command is used to send emails from the command line or from other programs that need to deliver emails. The sendmail command accepts various flags and parameters to specify the sender, recipient, subject, body, and attachments of the email. The sendmail command also reads the standard input for the email content if no file is specified. The sendmail command is part of the sendmail package, which is the original and most widely used MTA for Unix-like systems. However, other MTAs, such as Postfix and Exim, also provide a sendmail command for compatibility reasons. The sendmail command provided by these MTAs may have slightly different syntax and options, but they all support the basic functionality of sending emails. Therefore, the statement that all MTAs, including Postfix and Exim, provide a sendmail command is true123.

The other statements are false. The sendmail command does not need to be run periodically by the cron daemon, as it is not a daemon itself, but a command-line tool. The sendmail command does not print the MTA’s queue history, but rather sends the email to the MTA for delivery. The sendmail command is not only available when the sendmail MTA is installed, but also when other MTAs that provide a sendmail command are installed. References: 1: Linux Sendmail Command Help and Examples - Computer Hope 2: Send Email in Linux from Command Line | DigitalOcean 3: 5 Ways To Send Email from Linux Command Line - TecAdmin

The file ~/.forward is a text file that contains one or more email addresses to which the incoming mail for the user will be forwarded123. The file is owned by the user and can be edited with any text editor123. The file does not require any special syntax or commands, just a list of email addresses separated by commas or newlines123. For example, if the user wants to forward their mail to alice@example.com and bob@example.com, they can create a ~/.forward file with the following content:

alice@example.com, bob@example.com

The MTA will read the ~/.forward file and send a copy of each incoming mail to the specified addresses123. Therefore, the correct answer is D. When configured correctly, ~/.forward can be used to forward each incoming mail to more than one other recipient.

The other options are false regarding the file ~/.forward. The file is not owned by the MTA and does not need to be edited with the editaliases command, which is used to edit the system-wide aliases file, not the user-specific ~/.forward file4. The user does not need to run newaliases to make the MTA aware of the changes, as the MTA will check the ~/.forward file every time a mail is delivered to the user123. The newaliases command is used to rebuild the system-wide aliases database, not the user-specific ~/.forward file4. The file ~/.forward does not have any restrictions on the email addresses that can be used for forwarding, as long as they are valid and reachable123. The root user can also use the ~/.forward file to forward their mail, but it is not recommended for security reasons.

References: 1: LPIC 102 – Configure e-mail aliases and forwarding on Linux using MTA - TechViewLeo 2: topic 108.3: Mail transfer agent (MTA) basics - IBM Developer 3: 108.3 Mail Transfer Agent (MTA) basics - Linux Professional Institute … 4: Linux At, Batch, Atq, Atrm Command Help and Examples - Computer Hope : [How to forward root’s email to another email address - nixCraft]

 The server option is used to configure a persistent association with a remote server or peer. It takes an argument that is either a host name or a numeric IP address of the NTP server. The ntpd daemon will periodically send NTP packets to the specified server and adjust the local clock according to the received responses. Multiple server options can be used to specify more than one NTP source. For example, the following lines in the /etc/ntp.conf file configure four external NTP sources:

server 0.asia.pool.ntp.org

server 0.oceania.pool.ntp.org

server 0.europe.pool.ntp.org

server 0.north-america.pool.ntp.org

References: 

https://docs.ntpsec.org/latest/ntp_conf.html

https://vceguide.com/which-option-in-the-etc-ntp-conf-file-specifies-an-external-ntp-source-to-be-queried-for-time-information-2/

https://vceguide.com/which-option-in-the-etcntp-conf-file-specifies-an-external-ntp-source-to-be-queried-for-time-information/

The command cupsdisable -c -r hello HPLaserjet4 will pause the CUPS printer HPLaserjet4 and cancel all print jobs with a message, “hello”. The cupsdisable command is used to stop printers and classes, while the cupsenable command is used to start them. The -c option cancels all jobs on the named destination, and the -r option sets the message associated with the stopped state. The message will be displayed to the users who try to print to the paused printer. For example, the output of lpstat -p HPLaserjet4 after running the command will show:

printer HPLaserjet4 disabled since Wed 23 Jun 2023 11:54:03 AM UTC -

hello

The other options are not correct. The cupsreject command is used to reject or accept jobs for a printer or class, not to pause or resume them. The -p and -m options are not valid for either cupsdisable or cupsreject. The correct syntax for cupsreject is:

cupsreject [ -E ] [ -U username ] [ -h server [:port] ] [ -r reason ] destination (s)

The -E option forces encryption of the connection to the server, the -U option uses the specified username when connecting to the server, the -h option uses the specified server and port, and the -r option sets the message associated with the rejecting state123. References: 1: cupsdisable(8) - Linux manual page 2: cupsreject(8) - Linux manual page 3: CUPS Administration - Page: 1.4 - Seite 3 » Raspberry Pi Geek

The logger command can be used to generate syslog entries of any facility and priority. It is a shell command interface to the syslog system log module. It allows users to write messages to the system log from the command line or from a script. The logger command supports several options to specify the facility, priority, tag, message, and other attributes of the log entry. For example, the following command generates a log entry with the facility user and the priority info:

logger -p user.info “This is a test message”

The facility and priority can be any of the values defined in the syslog protocol, such as kern, mail, auth, local0, etc. for the facility, and emerg, alert, crit, err, warn, notice, info, debug, etc. for the priority. The default facility is user and the default priority is notice. The logger command can also read messages from standard input or from a file. For more information, see the logger man page or the logger - Linux man page online. References:

Syslogs in Linux: Understanding Facilities and Levels

What are Syslog Facilities and Levels? - Trend Micro

syslog-ng Open Source Edition 3.30 - Administration Guide

Syslog Logging Guide: Advanced Concepts - CrowdStrike

 The mailq command prints the list of messages that are in the mail queue. The mail queue is where outgoing mail is stored until a receiving server connection is available. The mailq command is the same as the sendmail -bp command, which also prints the mail queue. The mailq command is part of the topic 108.3: Mail transfer agent (MTA) basics, which is one of the objectives of the LPI Linux Administrator - 102 exam12. References: 1: https://learning.lpi.org/en/learning-materials/102-500/  2: https://www.lpi.org/our-certifications/exam-102-objectives/

The ~/.forward file is a file that users can create in their home directories to redirect mail or send mail using sendmail or a similar MTA system. The file contains a list of recipient addresses, which can be email addresses, file names, program names, or :include: files. The file must be owned by the user and have the read permission bit set for the owner. The file cannot be a symbolic link or have more than one hard link. The file is processed by sendmail when a recipient address selects a delivery agent with the F=w flag set. If the file contains a backslash, further processing is disabled and the message is delivered to the user’s mail-spooling directory. If the file does not exist or cannot be read, it is silently ignored. The ~/.forward file is different from the /etc/aliases file, which is a system-wide file that maps aliases to one or more recipient addresses. The /etc/aliases file is maintained by the system administrator and requires running the newaliases command after any changes. The ~/.alias file is not a valid file for sendmail or similar MTA systems. The /etc/mail/forwarders file is not a standard file for sendmail or similar MTA systems. The ~/.vacation file is a file that contains a vacation message that is sent to the sender when the user is away. The ~/.vacation file is used in conjunction with the vacation program, which can be invoked from the ~/.forward file. References: