LPI Linux Professional Institute BSD Specialist 702-100 Exam Dumps: Updated Questions & Answers (March 2026)

The inetd.conf file is the configuration file that needs to be edited before the TFTP service will start on a BSD system. The inetd daemon handles the TFTP service and other network services, and its configuration file contains settings that determine howthese services are managed. To enable the TFTP service, the corresponding entry in inetd.conf must be uncommented and properly configured. References:

FreeBSD Handbook - inetd

Linux Professional Institute BSD Specialist Exam Objectives

The cron job syntax consists of five fields that specify the time and date of execution, followed by the command or script to run. The fields are: minute, hour, day of month, month, and day of week. Each field can have a specific value, a range, a list, a wildcard (), or a step value. The wildcard () means any possible value for that field. The option B sets the minute field to 0 and the hour field to *, which means the script will run at the 0th minute of every hour, regardless of the day, month, or weekday. This is equivalent to once per hour. The other options are either invalid syntax or do not match the desired frequency. For example, option A sets all fields to *, which means the script will run every minute of every hour of every day, month, and weekday. Option C sets the minute field to * and the hour field to 0, which means the script will run every minute of the 0th hour, or once per day at midnight. Option D has a typo (o instead of *) and option E sets the day of month field to o, which is not a valid value. References:

crontab - FreeBSD crontab(5) Manual Page1

Crontab Explained in Linux [With Examples] - Linux Handbook2

The mailer.conf file is used to configure the mailer programs on a BSD system. It allows the system administrator to replace the default mailer programs, such as sendmail, with alternative ones, such as postfix or exim. The mailer.conf file contains a series of entries, each consisting of a label, an equal sign, and a command. The label is the name of the default mailer program, and the command is the path to the alternative mailer program that will be executed instead. For example, to replace sendmail with postfix, the mailer.conf file should contain the following entries:

sendmail /usr/local/sbin/sendmail send-mail /usr/local/sbin/sendmail mailq /usr/local/sbin/sendmail newaliases /usr/local/sbin/sendmail hoststat /usr/local/sbin/sendmail purgestat /usr/local/sbin/sendmail

The mailer.conf file is read by the mailwrapper program, which is a binary that acts as a wrapper for the mailer programs. The mailwrapper program is installed as /usr/sbin/sendmail and /usr/libexec/sendmail/sendmail, and it invokes the appropriate mailer program based on the mailer.conf file. Therefore, to replace the system MTA with another mail server program, the mailer.conf file needs to be updated with the path to the new MTA. References:

Chapter 31. Electronic Mail | FreeBSD Documentation Portal

DragonFlyBSD: mta

The ports collection on FreeBSD is a package management system that allows users to install third-party software from source or binary packages. The ports collection is stored in the /usr/ports/ directory, which contains subdirectories for different categories of software, such as archivers, databases, editors, etc. Each subdirectory contains one or more ports, which are directories that contain the files needed to build and install the software. The /usr/ports/ directory can be updated with the portsnap command34

Binary packages are pre-compiled versions of the ports that can be installed with the pkg command. Binary packages are downloaded from the FreeBSD package repository,which is hosted at pkg.freebsd.org. The packages are installed in the /usr/local/ directory by default, and the information about the installed packages is stored in the /usr/local/pkg/ directory. The /usr/local/pkg/ directory contains files with the .db extension, which are SQLite databases that store the metadata of the packages. The pkg command can query and manipulate these databases56 References: 3: https://docs.freebsd.org/en/books/handbook/ports/  4: https://www.freebsd.org/ports/  5: https://docs.freebsd.org/en/books/handbook/pkgng-intro/  6: https://www.freebsd.org/cgi/man.cgi?query=pkg &sektion=8

This command and option can be used to perform a reverse DNS lookup, which is the process of finding the domain name or hostname associated with an IP address. The dig command is a tool that can query DNS servers for various types of records, such as A, MX, NS, PTR, etc. The -x option tells dig to perform a reverse DNS lookup by sending a PTR query to the DNS server. For example, to perform a reverse DNS lookup for the IP address 8.8.8.8, the following command can be used:

dig -x 8.8.8.8

The output of this command will show the PTR record for 8.8.8.8, which is dns.google. This means that the hostname for 8.8.8.8 is dns.google. Reverse DNS lookups are useful for verifying the identity of a host, checking for mail server configuration, or troubleshooting network problems

Nmap is a program that can be used to enumerate all responsive hosts on a subnet. Nmap stands for Network Mapper, and it is a tool that can perform network discovery, port scanning, service detection, vulnerability assessment, and more. Nmap can send different types of packets to probe the hosts on a subnet and determine which ones are alive and what services they are running. Nmap can also perform OS fingerprinting, which can identify the operating system of the target hosts. Nmap has many options and features that can customize the scan according to the user’s needs and preferences. The other programs are not suitable for enumerating all responsive hosts on a subnet, because:

A. traceroute: This program is used to trace the route of packets from the source host to the destination host. It can show the intermediate hops and the latency of each hop. However, it cannot show all the hosts on a subnet, only the ones that are on the path to the destination.

B. netstat: This program is used to display the status of network connections, routing tables, interface statistics, and more. It can show the local and remote addresses and ports of the active connections, but it cannot show all the hosts on a subnet, only the ones that are connected to the local host.

D. rtso1: This is not a valid program name, but it may be a typo for rtso, which is a program that can perform TCP SYN scanning. However, this program is not as versatile and powerful as nmap, and it can only scan TCP ports, not UDP or other protocols.

E. route: This program is used to manipulate the routing table, which is used to determine the next hop for a packet based on its destination address. It can show the destination, gateway, interface, and flags of each route, but it cannot show all the hosts on a subnet, only the ones that are reachable via a specific gateway. References: 6: https://nmap.org/book/man.html  7: https://www.freebsd.org/cgi/man.cgi?query=traceroute &sektion=8 : https://www.freebsd.org/cgi/man.cgi?query=netstat &sektion=1 : https://www.freebsd.org/cgi/man.cgi?query=rtso &sektion=1 : https://www.freebsd.org/cgi/man.cgi?query=route &sektion=8

The subnet mask 255.255.224.0 corresponds to the hexadecimal netmask 0xffffe000 shown in the output. This subnet mask indicates a subnet with 19 bits for the network portion and 13 bits for the host portion, allowing for a large number of hosts within the subnet.

References:

BSD Specialist Exam 702 Objectives - Linux Professional Institute

FreeBSD Handbook - Networking

The file that defines the IP address of the default gateway on a FreeBSD system is /etc/rc.conf. This file contains various system configuration options, including network settings. To set the default gateway, the defaultrouter variable is used, followed by the IP address of the gateway. For example, defaultrouter=“192.168.1.254”. This setting will be persistent across reboots.

References

FreeBSD Set a Default Route / Gateway - nixCraft

Chapter 34. Advanced Networking | FreeBSD Documentation Portal

Static default gateway on FreeBSD 8.0 - Super User

The swapctl command is used to list, add, or delete swap devices on BSD systems. It can also display the total amount of swap space available and used. The swapctl command takes various options to perform different actions, such as -l to list the swap devices, -a to add a swap device, -d to delete a swap device, and -s to show the swapsummary. The other options are not valid BSD commands for managing swap devices. References:

swapctl(8) - OpenBSD manual pages

FreeBSD Handbook - Chapter 19. The FreeBSD Booting Process

FreeBSD Handbook - Chapter 9. Configuring the FreeBSD Kernel

The correct configuration line for sending all messages from the auth facility to a remote syslog server is auth.* @logger.example.org. In syslog configuration, the auth.* specifies the facility and priority, where auth is the facility for security/authorization messages, and * represents all priorities. The @ symbol is used to indicate that the messages are to be sent to a remote server, followed by the hostname of the remote syslog server. References:

FreeBSD Handbook - Logging

Linux Professional Institute BSD Specialist Exam Objectives