Netskope Netskope Certified Cloud Security Integrator (NCCSI) NSK200 Exam Dumps: Updated Questions & Answers (July 2026)

To prevent PCI data from leaving the corporate sanctioned OneDrive instance, the customer can use API Data Protection and Real-time Protection. API Data Protection is a feature that allows you to discover, classify, and protect data that is already resident in your cloud services, such as OneDrive. You can create a policy that matches the PCI data based on criteria such as users, content, activity, or DLP profiles. Then, you can choose an action to prevent the PCI data from being shared or exfiltrated, such as remove external collaborators, remove public links, or quarantine3. Real-time Protection is a feature that allows you to inspect and control data in transit between your users and cloud services, such as OneDrive. You can create a policy that matches the PCI data based on criteria such as users, devices, locations, categories, or DLP profiles. Then, you can choose an action to prevent the PCI data from being uploaded or downloaded, such as block, alert, encrypt, or watermark4. Therefore, options A and D are correct and the other options are incorrect. References: API Data Protection - Netskope Knowledge Portal, Real-time Protection - Netskope Knowledge Portal

To disable inspection for all users accessing Microsoft 365, you need to create a Do Not Decrypt SSL policy for the Microsoft 365 App Suite. This policy will prevent Netskope from decrypting and analyzing the traffic for any Microsoft 365 app, regardless of the access method (Netskope client or GRE tunnel)3. This policy will also allow SNI-based policies to apply, but no deep analysis performed via Real-time Protection policies4. Therefore, option B is correct and the other options are incorrect. References: Add a Policy for SSL Decryption - Netskope Knowledge Portal, Default Microsoft appsuite SSL do not decrypt rule - Netskope Community

Netskope can inspect outbound SMTP traffic for Microsoft Exchange and Gmail using the Netskope client. The Netskope client intercepts the SMTP traffic from the user’s device and forwards it to the Netskope cloud for DLP scanning. The Netskope client does not inspect inbound SMTP traffic, as this is handled by the cloud email service or the MTA. Therefore, option A is correct and the other options are incorrect. References: Configure Netskope SMTP Proxy with Microsoft O365 Exchange, Configure Netskope SMTP Proxy with Gmail, SMTP DLP, Best Practices for Email Security with SMTP proxy

There are two possible scenarios that would cause the behavior of files containing test data for credit cards not triggering DLP events when uploaded to Dropbox. One scenario is that the DLP rule has the severity threshold set to a value higher than the number of occurrences. This means that the rule will only trigger an event if the number of matches for the sensitive data exceeds the specified threshold. For example, if the rule has a severity threshold of 10 and the file contains only 5 credit card numbers, then no event will be generated. To fix this, you can lower the severity threshold or remove it altogether. The other scenario is that the credit card numbers in your test data are invalid 16-digit numbers. This means that the numbers do not pass the Luhn algorithm check, which is a validation method used by Netskope DLP to detect valid credit card numbers. For example, if the number is 1234-5678-9012-3456, then it is not a valid credit card number and will not be detected by Netskope DLP. To fix this, you can use valid test credit card numbers that pass the Luhn algorithm check. The other options are not valid scenarios for this behavior. The Netskope client is not steering Dropbox traffic is not a valid scenario because there are corresponding page events, which means that the traffic is being steered to Netskope. There is no API protection configured for Dropbox is not a valid scenario because API protection is not required for DLP detection on file uploads, which are handled by real-time protection. References: DLP Rule Settings1, Credit Card Number Detection2

Integrating with EDR vendors like Crowdstrike requires an API Client ID for authentication and data sharing. A remediation profile is also necessary to define automated actions that can be taken when threats are detected, ensuring effective response to endpoint threats​​.

To determine proper policy ordering for Netskope Real-time Protection policies, you need to follow these two statements: B. You do not need to create an “allow all” Web Access policy at the bottom. D. You must place high-risk block policies at the top. These statements are based on the best practices for policy ordering recommended by Netskope3. An “allow all” Web Access policy at the bottom is not necessary because any traffic that does not match any policy will be allowed by default. However, you can create a “monitor all” Web Access policy at the bottom if you want to log all the traffic that is not matched by any other policy4. High-risk block policies at the top are important because they prevent any traffic that poses a serious threat or violates a critical compliance standard from reaching its destination. These policies should have higher priority than other policies that may allow or modify the traffic5. Therefore, options B and D are correct and the other options are incorrect. References: Real-time Protection Policies - Netskope Knowledge Portal, Create a Real-time Protection Policy for Web Categories - Netskope Knowledge Portal, Best Practices: Real-time Protection Policies (1 of 2) - Netskope

To apply different actions for each DLP profile in the same policy, you need to enable the " set action for each profile " flag. This allows you to configure unique actions (e.g., block, allow) for each DLP profile within a single combined policy, thus reducing the total number of policies needed​​.

To discover new cloud applications in use within an organization, three methods that would accomplish this task are B. Deploy an On-Premises Log Parser (OPLP), C. Use forward proxy steering methods to direct cloud traffic to Netskope, and E. Upload firewall or proxy logs directly into the Netskope platform. An On-Premises Log Parser (OPLP) is a software component that allows you to parse logs from your on-premises firewall or proxy devices and send them to the Netskope cloud for analysis and reporting. You can deploy an OPLP on a Linux server in your network and configure it to connect to your log sources and upload logs periodically or in real time3. A forward proxy steering method is a way of directing your web traffic from your users’ devices or browsers to the Netskope cloud for inspection and policy enforcement. You can use forward proxy steering methods such as PAC file, VPN, or inline proxy to steer traffic to Netskope and discover new cloud applications in use4. Uploading firewall or proxy logs directly into the Netskope platform is a way of manually sending logs from your log sources to the Netskope cloud for analysis and reporting. You can upload firewall or proxy logs directly into the Netskope platform by going to SkopeIT > Settings > Log Upload > New Log Upload and selecting the log source type, file format, log file, and time zone5. Therefore, options B, C, and E are correct and the other options are incorrect. References: On-Premises Log Parser - Netskope Knowledge Portal, Traffic Steering - Netskope Knowledge Portal, Upload Firewall or Proxy Logs Directly into the Platform - Netskope Knowledge Portal

A reverse proxy integrated with their SSO would satisfy the requirements for this scenario. A reverse proxy intercepts requests from users to cloud apps and applies policies based on user identity, device posture, app, and data context. It can enforce DLP controls to prohibit downloading sensitive files to unmanaged devices. It can also integrate with the customer’s SSO provider to authenticate users and allow access only to the corporate instance of OneDrive. The other steering methods are not suitable for this scenario because they either require the Netskope client or do not provide granular control over cloud app activities.

To allow the security team to use the test data file that was detected as a virus by the Netskope Heuristics Engine, the following two steps are correct:

Click the “Add To File Filter” button to add the IOC to a file list. This will exclude the file from future malware scans and prevent false positive alerts. The file list can be managed in the Settings > File Filter page1.

Click the “Lookup VirusTotal” button to verify if this IOC is a false positive. This will open a new tab with the VirusTotal report for the file hash. VirusTotal is a service that analyzes files and URLs for viruses, worms, trojans, and other kinds of malicious content. The report will show how many antivirus engines detected the file as malicious and provide additional information about the file2.

https://docs.netskope.com/en/netskope-help/admin-console/incidents/