Nokia Nokia Virtual Private LAN Services 4A0-105 Exam Dumps: Updated Questions & Answers (October 2025)

If a spoke-SDP is configured between the new site and PE-D no further SDPs will be required.

If a mesh- SDP is configured between the new site and PE-D no further SDPs will be required.

A mesh- SDP must be configured between the new site and all other PEs within Metro B.

A spoke- SDP must be configured between the new site and all other PEs within Metro B.

Only R4 will be reachable through the VPLS.

B All devices will be reachable through the VPLS.

R4 and R3 will remain reachable.

No devices will be reachable.

The l-TAG in the l-SID is inspected to determine where the frame should be delivered.

When the B-MAC header is stripped the customer MAC address is then looked up in the FDB

The l-SID in the l-TAG is inspected to determine where the frame should be delivered.

The PE inspects the service label in the MPLS header before stripping the B-MAC header.

The PE devices participating in the VPLS mesh run a separate Spanning Tree instance in the Core. The Primary Bridge is the Root Bridge for the VPLS mesh.

The PE devices participating in the VPLS mesh determine which bridge is closest to Root Bridge. This bridge becomes the Primary Bridge.

The PE devices participating in the VPLS mesh determine which bridge has the lowest bridge-id. This bridge becomes the Primary Bridge.

The PE devices participating in the VPLS mesh determine which bridge is the Root Bridge. This becomes the Primary Bridge.

All untagged frames will be dropped.

The source MAC address of a frame with a top tag of 200 and bottom tag of 300 will be populated in VPLS 3.

All frames with more than one tag will be dropped.

The source MAC address of a frame with a single tag of 500 will be populated in VPLS 1.

The source MAC address of a frame with a top tag of 100 will be populated in VPLS 2.

oam mac-populate

oam mac-ping

oam mac-trace

oam svc-ping

oam cpe-ping

The SDP must be configured to use GRE encapsulation.

The SDP must follow the same path as the user's SDP.

The SDP should be configured to use an RSVP signaled transport with fast reroute.

The SDP must be the same as the user's SDP.

TRUE

FALSE

TRUE

FALSE

Theloopbackfuntionin802.1ag is an intrusive test that will stop customer data.

The loopback function of 802.lag is a non-intrusive "ping" sent from a MEP to a remote MEP or MIP.

The loopback function in 802.3ah is an intrusive test that will loop customer data.

The loopback function of 802.lag is an intrusive test that will "loop" all customer data back to the original sender.