Nutanix Nutanix Certified Professional (NCP) 5.10 Exam NCP-5.10 Exam Dumps: Updated Questions & Answers (October 2025)

Allows proxy server settings to be set up for a defined network

Allows AHV to assign IP addresses automatically to VMs using DHCP

Configures a VLAN with an IP subnet and assigns a group of IP addresses

Configures firewall rules to prevent or allow certain TCP/IP traffic

AOS

BMC

BIOS

Hypervisor

HBA Firmware

Update a vNIC on the VM to operate in trunked mode for all desired VLANs.

Use SFPs that allow the needed VLANs.

Use one vNIC per VLAN for the VM.

Create a network in AHV associated with all those VLANs on all hosts.

The entire cluster is upgraded to the latest one-click release.

The node is added and a separate upgrade operation must be performed.

The addition fails and forces the administrator to image using standalone Foundation.

The node is automatically re-imaged using the software currently running in the cluster.

The cluster runs in a degraded state until the failed drives are replaced and the data has been restored to three replicas.

Sixty minutes after the failures a rebuild of the lost data can remaining HDDs begins to restore to three replicas.

The VMs with data on those drives crash, and an HA event occurs, restarting them on a remaining healthy node.

The Nutanix cluster recognizes the failures and immediately begins to rebuild lost data to three replicas.

3 nodes with cluster RF 3 and container RF 3

3 nodes with cluster RF 3 and container RF 2

5 nodes with cluster RF 2 and container RF 3

5 nodes with cluster RF 3 and container RF 3

var

tmp

boot

horn

data

Potentially increased amount of data stored in the SSD tier.

The node stops utilizing Erasure Coding.

Increased Controller VM CPU Load.

AOS is unable to do deduplication during the Erasure Coding failure.

Disable encryption on the cluster

Deploy an additional Native KMS Server

Enable encryption for a VM

Change Native KMS to External KMS

The CD-ROM interface is too slow.

The administrator selected a disk attached before it can boot to a CD.

The VM needs to have a standard disk attached before it can boot to a CD.

The bootable CD image is corrupted during creation.