Nutanix Nutanix Certified Professional - Database Automation (NCP-DB v6.10) NCP-DB Exam Dumps: Updated Questions & Answers (October 2025)

To deploy Nutanix Database Service (NDB) in Prism Element, the minimum account access level required is Cluster Administrator. This role provides the necessary permissions to manage cluster resources (e.g., storage, networking, and VMs) required for NDB deployment, including registering the cluster with NDB, configuring storage containers, and deploying NDB components. Lower roles like Viewer or Backup Administrator lack the scope to perform these tasks, and User Administrator is focused on user management, not deployment.

Other options are insufficient:

A. User Administrator: Manages users and roles, not cluster operations.

C. Viewer: Read-only access, inadequate for deployment.

D. Backup Administrator: Limited to backup tasks, not deployment.

Thus, the verified answer is B, aligning with NDB deployment prerequisites.

Official Nutanix Database Automation References

Nutanix Database Management & Automation (NDMA) course, Module 2: Deploying and Configuring an NDB Solution, Lesson 2.3: Registering a Nutanix Cluster.

Nutanix Certified Professional - Database Automation (NCP-DB) v6.5 Knowledge Objectives, Section 2: Deploy and Configure an NDB Solution, Objective 2.2: Register a Nutanix Cluster (applicable to v6.10).

Nutanix NDB Installation Guide: "Prism Element Role Requirements" section.

To configure a database with a Time Machine protection mode that includes the Log Catchup operation in NDB, the most essential component is a Service Level Agreement (SLA) that supports continuous log retention. The Log Catchup operation enables point-in-time recovery (PITR) by replaying transaction logs from a specified point, ensuring minimal data loss and meeting Recovery Point Objective (RPO) requirements. This functionality depends on the Time Machine being configured with an SLA that includes the "Continuous Log Retention" option, which ensures transaction logs are captured and retained continuously alongside snapshots.

Option A is incorrect because a daily snapshot alone is insufficient without log retention to enable Log Catchup.

Option B is incorrect because an SLA retention schedule for daily snapshots does not inherently include continuous log capture, which is required for Log Catchup.

Option C is correct as it specifies the Continuous Log Retention option, the critical feature for enabling Log Catchup in a Time Machine SLA.

Option D is incorrect because while frequency settings are important, they are secondary to selecting an SLA with continuous log retention as the foundational requirement.

This configuration ensures robust data protection and recovery capabilities tailored to the database’s needs.

References

Nutanix Database Service (NDB) User Guide, Chapter 5: Configuring Time Machines, Section: Setting Up SLAs with Log Catchup

Nutanix Support & Insights, Knowledge Base Article: "Configuring Time Machine with Log Catchup in NDB"

Nutanix Certified Professional - Database Automation (NCP-DB) v6.5 Blueprint, Section 5: Protect Databases Using Time Machine

In a high availability (HA) Nutanix Database Service (NDB) environment, custom SSL certificates are used to secure communication between clients (e.g., NDB GUI, API calls) and the NDB control plane. The HA Proxy VMs serve as the entry point for all external traffic, load balancing requests across the NDB API server VMs and providing secure SSL termination. When configuring custom SSL certificates, they must be updated on all HA Proxy VMs to ensure consistent and secure communication across the HA environment. Updating only a subset of servers or other components (like API or Repository VMs) would lead to inconsistencies or SSL handshake failures.

Option A (All API server VMs) is incorrect because the API servers do not directly handle external SSL termination; this is managed by the HA Proxy layer.

Option B (All HA Proxy VMs) is correct as these VMs are responsible for SSL termination and load balancing in an HA setup, requiring the custom certificates to be applied uniformly.

Option C (The API and Repository VMs running on the primary cluster) is incorrect because Repository VMs do not handle client-facing traffic, and the API servers rely on HA Proxy for SSL handling.

Option D (The primary API, Repository, and HA Proxy servers) is incorrect because it implies a single "primary" server focus, whereas in an HA setup, all HA Proxy VMs (not just a primary one) must be updated.

This aligns with NDB’s HA architecture, where HA Proxy VMs are the critical components for SSL certificate management.

References

Nutanix Database Service (NDB) User Guide, Chapter 3: Configuring an NDB Environment, Section: Configuring High Availability and SSL Certificates

Nutanix Support & Insights, Knowledge Base Article: "Configuring Custom SSL Certificates in NDB HA Environments"

Nutanix Certified Professional - Database Automation (NCP-DB) v6.5 Blueprint, Section 3: Configure an NDB Environment

According to the Nutanix Database Automation (NCP-DB) learning documents, when doing an Era software upgrade for a Multi-Cluster enabled installation, the Era Cluster Agent is upgraded first1. This is the first component in a Nutanix Environment Upgrade cycle2. The Era Cluster Agent is crucial for managing and monitoring the health of the Nutanix clusters1. Please refer to the official Nutanix documentation and training materials for more detailed information1.

When a vCenter instance managing multiple clusters, including a Nutanix cluster hosting the NDB service, crashes and a new dedicated vCenter server is deployed, the administrator must update the vCenter settings within NDB to re-establish connectivity and management. The correct action is to navigate to the NDB Administration page, where cluster and vCenter configurations can be updated. This page allows the administrator to re-register the new vCenter instance, ensuring NDB can continue to manage the clusters and database VMs effectively. This approach avoids unnecessary reconfiguration wizards or waiting for automatic syncs.

Option A (Click the Getting Started page and perform the configuration wizard) is incorrect because the Getting Started wizard is for initial setup, not post-crash vCenter updates.

Option B (Update cluster settings from the NDB administration page) is correct as it provides the specific interface to modify vCenter settings after a crash.

Option C (Open the maintenance page in NDB and configure the cluster settings) is incorrect because the maintenance page is for service operations, not vCenter reconfiguration.

Option D (Wait 60 minutes and Prism Central will automatically sync NDB) is incorrect because Prism Central does not automatically sync vCenter settings in NDB; manual updates are required.

This ensures seamless integration with the new vCenter instance.

References

Nutanix Database Service (NDB) User Guide, Chapter 6: Administering an NDB Environment, Section: Updating vCenter Settings

Nutanix Support & Insights, Knowledge Base Article: "Reconfiguring vCenter in NDB After Failure"

Nutanix Certified Professional - Database Automation (NCP-DB) v6.5 Blueprint, Section 6: Administer an NDB Environment

When upgrading NDB and the upgrade includes updates to out-of-the-box (OOB) software profiles (e.g., predefined profiles for database software like PostgreSQL, SQL Server, etc.), NDB manages older versions of these profiles based on their usage. If the older OOB software profiles are not actively in use by any database VMs, NDB automatically deletes all versions of those profiles from its metadata and associated protection domains during the upgrade process. This cleanup mechanism helps maintain a lean and efficient system by removing obsolete profiles that are no longer relevant or required.

Option A is incorrect because the condition about Time Machines and snapshots in the last 24 hours is not a documented criterion for profile deletion during an NDB upgrade.

Option B is correct as it reflects NDB’s behavior of removing unused OOB software profiles during upgrades to optimize resource usage and metadata.

Option C is incorrect because shutting down database VMs does not trigger automatic deletion of software profiles; the key factor is whether the profiles are in use.

Option D is incorrect because the concept of a "base version" is not relevant here; deletion depends solely on whether the profiles are unused, not on versioning specifics.

This behavior ensures that only active and necessary profiles persist post-upgrade, streamlining administration.

References

Nutanix Database Service (NDB) User Guide, Chapter 6: Upgrading NDB, Section: Handling Software Profile Updates

Nutanix Support & Insights, Technical Note: "NDB Upgrade Process and Software Profile Management"

Nutanix Certified Professional - Database Automation (NCP-DB) v6.5 Blueprint, Section 6: Administer an NDB Environment

 NDB HA is a feature that provides high availability and resilience for the NDB service and its components. NDB HA creates a cluster of API server VMs, repository VMs, and HAProxy VMs across multiple Nutanix clusters. Each component has a leader and a set of followers that are synchronized and can take over the leader role in case of a failure. NDB HA also monitors the health and status of the NDB components and performs automatic failover and recovery actions when possible. However, some failure scenarios may require manual intervention from the administrator to restore the NDB service. One such scenario is when more than one API server VM is down. The API server VMs are responsible for handling the requests from the NDB UI and CLI, as well as communicating with the repository VMs and the HAProxy VMs. If more than one API server VM is down, the NDB service may become unavailable or unstable, and the administrator will need to manually restart or redeploy the affected API server VMs. The other options do not require manual interaction for the recovery, as NDB HA can handle them automatically. If one repository VM is down, NDB HA will fail over to another repository VM that has the latest data. If more than one HAProxy VM is down, NDB HA will route the traffic to the remaining HAProxy VMs. If the NDB server process is down, NDB HA will restart the process or fail over to another API server VM. References:

Nutanix Certified Professional - Database Automation (NCP-DB) v6.5, Section 2 - Deploy and Configure an NDB Solution, Objective 2.3: Configure NDB High Availability

Nutanix Database Management & Automation (NDMA) Course, Module 3: Nutanix Database Service (NDB) Installation and Configuration, Lesson 3.3: Configuring NDB High Availability, Topic: NDB HA Architecture and Components

Nutanix Support & Insights, RA-2035: Nutanix Database Service High Availability, Section: NDB HA Failure Scenarios and Recovery Actions

In NDB, a Time Machine manages snapshots and log catch-up operations for database protection and recovery. The scenario describes a Time Machine where automatic snapshot and log catch-up activities (both automatic and manual) are halted, and manual snapshots cannot be created. This indicates the Time Machine is in a PAUSED state.

In NDB, the Time Machine states are:

FROZEN: A temporary state during specific operations (e.g., cloning), but it doesn’t halt all activities permanently.

OFFLINE: Indicates the Time Machine is unavailable or not operational, often due to connectivity or configuration issues, but this typically prevents access rather than just halting operations.

PAUSED: Explicitly stops all scheduled and manual snapshot/log activities, often manually triggered by an administrator or due to an error condition (e.g., resource constraints). Operations resume when unpaused.

READY: The normal operational state where snapshots and log catch-ups occur as scheduled.

Given the inability to create manual snapshots alongside halted automatic operations, PAUSED is the most fitting status, as it reflects an intentional or enforced suspension of activities.

Official Nutanix Database Automation References

Nutanix Database Management & Automation (NDMA) course, Module 5: Data Protection and Recovery, Lesson 5.2: Managing Time Machines.

Nutanix Certified Professional - Database Automation (NCP-DB) v6.5 Knowledge Objectives, Section 5: Protect Databases Using NDB, Objective 5.2: Manage Time Machine States (applicable to v6.10).

Nutanix NDB Administration Guide: "Time Machine Statuses and Operations" section.

To change the static IP address on the NDB VM, an administrator would need to enter the NDB command line using the cerebro_cli command. The cerebro_cli command is used to access the Cerebro service, which is responsible for managing the NDB instance and its components. The cerebro_cli command can be run from the NDB VM or from any other VM that has network connectivity to the NDB VM. The cerebro_cli command has various subcommands and options to perform different tasks, such as changing the IP address, hostname, password, or certificate of the NDB VM. To change the static IP address, the administrator would need to use the cerebro_cli network update subcommand with the appropriate parameters, such as the new IP address, netmask, gateway, and DNS servers. The cerebro_cli network update subcommand also requires the administrator to provide the current password of the NDB VM for authentication. After changing the IP address, the administrator would need to restart the NDB VM for the changes to take effect. References:

Nutanix Certified Professional - Database Automation (NCP-DB) v6.5, Section 2 - Deploy and Configure an NDB Solution, Objective 2.2: Configure an NDB Instance

Nutanix Database Management & Automation (NDMA) Course, Module 3: Nutanix Database Service (NDB) Installation and Configuration, Lesson 3.2: Configuring NDB, Topic: Changing the IP Address of the NDB VM

Nutanix Database Service (NDB) Command Line Interface Guide, Chapter 2: Cerebro CLI, Section: cerebro_cli network update

For supported Linux-based database VMs managed by NDB, keeping software profiles updated for provisioning new database VMs requires a structured process. The administrator must first apply the necessary patches (e.g., OS updates and database engine patches) to an existing database VM for each supported database engine (e.g., PostgreSQL, Oracle). Then, a new software profile version must be created using the updated VM as the source. This new version captures the patched configuration and can be used to provision new VMs, ensuring they are deployed with the latest updates.

Option A (Create a Maintenance window under the policy menu, then under Database VM, add the database VMs to that maintenance window and check both Database and Operating system updates) is incorrect because a Maintenance Window schedules updates for existing VMs, not for updating software profiles for new provisions.

Option B (Apply patches to a database VM for each supported database engine, then create a new software profile version for each supported database VM for each one using the updated database VM as the source) is correct as it follows the standard NDB process for profile updates.

Option C (Associate the newly provisioned database VMs with a maintenance window so they are kept updated) is incorrect because this applies to ongoing maintenance, not initial profile updates for provisioning.

Option D (In the Administrator menu drop down, go the Maintenance tab and choose Download Upgrade) is incorrect because downloading upgrades is part of the patch process, not the profile creation step.

This method ensures new VMs are provisioned with the latest software configurations.

References

Nutanix Database Service (NDB) User Guide, Chapter 4: Managing Software Profiles, Section: Updating Software Profiles

Nutanix Certified Professional - Database Automation (NCP-DB) v6.5 Blueprint, Section 4: Manage Database Software Profiles