RedHat RHCE (Redhat Certified Engineer) RH302 Exam Dumps: Updated Questions & Answers (November 2025)

Note: Examiner will provide you the Installation startup CD. And here mentioned size may vary see on the exam paper.

1.Insert the CD on CD-ROM and start the system.

2.In Boot: Prompt typelinux askmethod

3. It will display the Language, keyboard selection.

4. It will ask you for the installation method.

5. Select the HTTP from the list

6. It will ask the IP Address, Net mask, Gateway and Name Server. Select Use

Dynamic IP Configuration: because DHCP Server will be configured in your exam lab.

7. It will ask for the Web site name and Redhat Enterprise Linux Directory.

Specify the HTTP Server: 192.168.0.254

Directory: rhel4Because Default Directory for http is /var/www/html

8. After Connecting to the HTTP Server Installation start. Go upto the partition screen by selecting the different Options.

9. Create the partition According to the Question because Size and what-what partition should you create at installation time is specified in your question

10. Then select the MBR Options, time zone and go upto package selections.

It is another Most Important Time of installation. Due to the time limit, you should be

care about the installation packages. At Exam time you these packages are enough.

X-Window System

GNOME Desktop

(these two packages are generally not required)

Administration Tools.

System Tools

Windows File Server

FTP Servers

Mail Servers

Web Servers

Network Servers

Editors

Text Based Internet

Server Configuration Tools

Printing Supports

When installation will complete, your system will reboot. Jump for another Question.

Do the following steps as:

1.cat >schedule

*/2 * * * * /bin/echo “Hello World” >/dev/tty8

crontab schedule

Verify using: crontab –l

service crond restart

Cron helps to schedule on recurring events. Pattern of Cron is:

MinuteHourDay of MonthMonthDay of WeekCommands

0-590-231-311-120-7 where 0 and 7 means Sunday.

Note * means every. To execute the command on every two minutes */2.

To add the scheduled file on cron job: crontab filename

To List the Cron Shedule: crontab –l

To Edit the Schedule: crontab –e

To Remove the Schedule: crontab –r

Do the following steps as:

1.useradd eric

Very tricky question given to you that this user should not belongs to sysadmin group.

Note: Examiner will provide you the Installation startup CD. And size may vary see on the exam paper.

1.Insert the CD on CD-ROM and start the system.

2.In Boot: Prompt typelinux askmethod

3. It will display the language, keyboard selection.

4. It will ask you for the installation method.

5. Select the NFS Image from the list

6. It will ask the IP Address, Net mask, Gateway and Name Server. Select Use

Dynamic IP Configuration: because DHCP Server will be configured in your exam lab.

7. It will ask for the NFS Server Name and Redhat Enterprise Linux Directory.

Specify the NFS Server: 192.168.0.254

Directory: /var/ftp/pub

8. After Connecting to the NFS Server Installation start in GUI. Go up to the partition screen by selecting the different Options.

9. Create the partition According to the Question because Size and what-what partition should you create at installation time is specified in your question

10. Then select the MBR Options, time zone and go upto package selections.

It is another Most Important Time of installation. Due to the time limit, you should care about the installation packages. At Exam time you these packages are enough.

X-Window System

GNOME Desktop

(these two packages are generally not required)

Administration Tools.

System Tools

Windows File Server

FTP Servers

Mail Servers

Web Servers

Network Servers

Editors

Text Based Internet

Server Configuration Tools

Printing Supports

When installation will complete, your system will reboot. Jump for another Question.

Do the following steps as:

1.vi /etc/cron.allow

root

or

vi /etc/cron.deny

Write all user name to deny.

/etc/cron.allow, /etc/cron.deny file is used to control users to allow or deny. If /etc/cron.allow file is created only that users are allowed to run cron schedule. Another way to deny to users is /etc/cron.deny write all user name on single line.

Do the following steps as:

1.chgrp sysuser /archive

2.Verify using ls -ld /archive command. You should get like

drwxr-x--- 2 root sysadmin 4096 Mar 16 17:59 /archive

chgrp command is used to change the group ownership of particular files or directory.

Another way you can use the chown command.

chown root:sysuser /archive

Do the following steps as:

1.usermod -G sysadmin john

2.usermod –G sysadmin jane

3.Verify by reading /etc/group file

Using usermod command we can make user belongs to different group. There are two types of group one primary and another is secondary. Primary group can be only one but user can belongs to more than one group as secondary.

usermod -g groupname usernameTo change the primary group of the user

usermod -G groupname usernameTo make user belongs to secondary group.

We can change the permission of file/directory either character symbol method or numeric method.

Permission:

r-Read

w-Write

x-Execute

Permission Category

u- Owner User

g- Owner Group

o- Others

Operators

+Add the Permissions

-Remove the Permissions

=Assigns the Permissions

Numeric Method:

4Read

2Write

1Execute

Total: 7, total for owner user, owner group member and for others : 777

chmod u+rwx /data

chmod g+rwx /data

chmod o-rwx /data

or

chmod 770 /data

Verify the /data : ls –ld /data

You will get drwxrwx---

Do the following steps as:

1.useradd jane

2.useradd john

useradd command is used to create the user. All user’s information stores in /etc/passwd and user;s shadow password stores in /etc/shadow.

Do the following steps as:

1.Open the Browser and type the above URL.

2.Fill the form as required all information.