Splunk Splunk O11y Cloud Certified Metrics User Exam SPLK-4001 Exam Dumps: Updated Questions & Answers (July 2025)

The correct answer is B. Add a filter to narrow the scope of the measurement.

A filter is a way to reduce the number of metric time series (MTS) that are displayed on a chart or used in a detector. A filter specifies one or more dimensions and values that the MTS must have in order to be included. For example, if you want to monitor the memory.free metric only for hosts that belong to a certain cluster, you can add a filter like cluster:my-cluster to the plot or detector. This will exclude any MTS that do not have the cluster dimension or have a different value for it1

Adding a filter can help you avoid exceeding the plot cap, which is the maximum number of MTS that can be contained in a single plot. The plot cap is 100,000 by default, but it can be changed by contacting Splunk Support2

To learn more about how to use filters in Splunk Observability Cloud, you can refer to this documentation3.

1: https://docs.splunk.com/Observability/gdi/metrics/search.html#Filter-metrics 2: https://docs.splunk.com/Observability/gdi/metrics/detectors.html#Plot-cap 3: https://docs.splunk.com/Observability/gdi/metrics/search.html

The correct answer is C. 1 second.

According to the Splunk Test Blueprint - O11y Cloud Metrics User document1, one of the metrics concepts that is covered in the exam is data resolution and rollups. Data resolution refers to the granularity of the metric data points, and rollups are the process of aggregating data points over time to reduce the amount of data stored.

The Splunk O11y Cloud Certified Metrics User Track document2 states that one of the recommended courses for preparing for the exam is Introduction to Splunk Infrastructure Monitoring, which covers the basics of metrics monitoring and visualization.

In the Introduction to Splunk Infrastructure Monitoring course, there is a section on Data Resolution and Rollups, which explains that Splunk Observability Cloud collects high-resolution metrics at 1-second intervals by default, and then applies rollups to reduce the data volume over time. The document also provides a table that shows the different rollup intervals and retention periods for different resolutions.

Therefore, based on these documents, we can conclude that for a high-resolution metric, the highest possible native resolution of the metric is 1 second.

The chart visualization types that are unaffected by changing the time picker on a dashboard are:

Single Value: A single value chart shows the current value of a metric or an expression. It does not depend on the time range of the dashboard, but only on the data resolution and rollup function of the chart1

List: A list chart shows the values of a metric or an expression for each dimension value in a table format. It does not depend on the time range of the dashboard, but only on the data resolution and rollup function of the chart2

Therefore, the correct answer is A and D.

To learn more about how to use different chart visualization types in Splunk Observability Cloud, you can refer to this documentation3.

1: https://docs.splunk.com/Observability/gdi/metrics/charts.html#Single-value 2: https://docs.splunk.com/Observability/gdi/metrics/charts.html#List 3: https://docs.splunk.com/Observability/gdi/metrics/charts.html

According to the Splunk O11y Cloud Certified Metrics User Track document1, percentages and ratios are useful for calculating the proportion of one metric to another, such as cache hits to cache misses, or successful requests to failed requests. You can use the percentage() or ratio() functions in SignalFlow to compute these values and display them in charts. For example, to calculate the cache hit rate for a service, you can use the following SignalFlow code:

percentage(counters(“cache.hits”), counters(“cache.misses”))

This will return the percentage of cache hits out of the total number of cache attempts. You can also use the ratio() function to get the same result, but as a decimal value instead of a percentage.

ratio(counters(“cache.hits”), counters(“cache.misses”))

The best practices for creating detectors are:

View data at highest resolution. This helps to avoid missing important signals or patterns in the data that could indicate anomalies or issues1

Have a consistent value. This means that the metric or dimension used for detection should have a clear and stable meaning across different sources, contexts, and time periods. For example, avoid using metrics that are affected by changes in configuration, sampling, or aggregation2

View detector in a chart. This helps to visualize the data and the detector logic, as well as to identify any false positives or negatives. It also allows to adjust the detector parameters and thresholds based on the data distribution and behavior3

Have a consistent type of measurement. This means that the metric or dimension used for detection should have the same unit and scale across different sources, contexts, and time periods. For example, avoid mixing bytes and bits, or seconds and milliseconds.

1: https://docs.splunk.com/Observability/gdi/metrics/detectors.html#Best-practices-for-detectors 2: https://docs.splunk.com/Observability/gdi/metrics/detectors.html#Best-practices-for-detectors 3: https://docs.splunk.com/Observability/gdi/metrics/detectors.html#View-detector-in-a-chart : https://docs.splunk.com/Observability/gdi/metrics/detectors.html#Best-practices-for-detectors

The correct answer is C. On the chart for plot A, select Add Analytics, then select Mean:Aggregation. In the window that appears, select ‘version’ from the Group By field.

This will create a new plot B that shows the average memory utilization for each version of the application. The engineer can then compare the values of plot B for the ‘canary’ and ‘stable’ versions to see if there is a significant difference.

To learn more about how to use analytics functions in Splunk Observability Cloud, you can refer to this documentation1.

1: https://docs.splunk.com/Observability/gdi/metrics/analytics.html

According to the web search results, dashboard groups are a feature of Splunk Observability Cloud that allows you to organize and share dashboards with other users in your organization1. You can create dashboard groups based on different criteria, such as service, team, role, or topic. You can also set permissions for each dashboard group, such as who can view, edit, or manage the dashboards in the group. Dashboard groups make it possible to share a collection of charts with your entire SRE organization, or any other group of users that you want to collaborate with.

According to the Splunk Test Blueprint - O11y Cloud Metrics User document1, one of the metrics concepts that is covered in the exam is analytic functions. Analytic functions are mathematical operations that can be applied to metrics to transform, aggregate, or analyze them.

The Splunk O11y Cloud Certified Metrics User Track document2 states that one of the recommended courses for preparing for the exam is Introduction to Splunk Infrastructure Monitoring, which covers the basics of metrics monitoring and visualization.

In the Introduction to Splunk Infrastructure Monitoring course, there is a section on Analytic Functions, which explains that analytic functions can be used to perform calculations on metrics, such as sum, average, min, max, count, etc. The document also provides examples of how to use analytic functions in charts and dashboards.

One of the analytic functions that can be used is Sum Aggregation, which calculates the sum of values present in the input time series across the entire environment or per group. The document gives an example of how to use Sum Aggregation to calculate the total CPU usage across all hosts in a group by using the following syntax:

sum(cpu.utilization) by hostgroup

According to the web search results, dimensions are metadata in the form of key-value pairs that monitoring software sends in along with the metrics. The set of metric time series (MTS) dimensions sent during ingest is used, along with the metric name, to uniquely identify an MTS1. Splunk Observability Cloud has a limit of 36 unique dimensions per MTS2. If the limit of allowed dimensions is exceeded for an MTS, the additional dimensions are dropped and not stored or indexed by Observability Cloud2. This means that the data point is still ingested, but without the extra dimensions. Therefore, option A is correct.

The component of the OpenTelemetry Collector that allows for the modification of metadata is A. Processors.

Processors are components that can modify the telemetry data before sending it to exporters or other components. Processors can perform various transformations on metrics, traces, and logs, such as filtering, adding, deleting, or updating attributes, labels, or resources. Processors can also enrich the telemetry data with additional metadata from various sources, such as Kubernetes, environment variables, or system information1

For example, one of the processors that can modify metadata is the attributes processor. This processor can update, insert, delete, or replace existing attributes on metrics or traces. Attributes are key-value pairs that provide additional information about the telemetry data, such as the service name, the host name, or the span kind2

Another example is the resource processor. This processor can modify resource attributes on metrics or traces. Resource attributes are key-value pairs that describe the entity that produced the telemetry data, such as the cloud provider, the region, or the instance type3

To learn more about how to use processors in the OpenTelemetry Collector, you can refer to this documentation1.

1: https://opentelemetry.io/docs/collector/configuration/#processors 2: https://github.com/open-telemetry/opentelemetry-collector-contrib/tree/main/processor/attributesprocessor 3: https://github.com/open-telemetry/opentelemetry-collector-contrib/tree/main/processor/resourceprocessor