VMware VMware Cloud Professional 2V0-33.22 Exam Dumps: Updated Questions & Answers (October 2025)

https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-operations/GUID-ED8B84E8-BF1C-47EE-BB60-8D5741351822.html

By default, the management gateway firewall is set to deny all traffic between the internet and vCenter Server. Verify that the appropriate firewall rules are in place.

The administrator can create an NSX firewall rule in the VMware Cloud data center that allows access to the vCenter from the on-premises data center. This would allow the VPN connection to connect to the vCenter, allowing the administrator to access and manage the VMware Cloud environment.

https://blogs.vmware.com/cloud/2019/07/02/dhcp-dhcp-relay-vmware-cloud-aws/

To create a new network segment in the software-defined data center that utilizes the corporate DHCP server to provide IP addresses, the proper sequence is to create a DHCP relay profile, create a new segment attached to the Tier-1 gateway, and configure the segment DHCP config to utilize the new DHCP relay profile1. This is because the DHCP relay profile contains the IP address of the external DHCP server and the DHCP relay agent that forwards the DHCP requests and responses between the segment and the DHCP server1. The segment must be attached to the Tier-1 gateway, which is the edge device that provides routing and firewall services for the segment2. The segment DHCP config allows the administrator to specify the DHCP type, the DHCP relay profile, and the DHCP options for the segment3. References: 1: Configure Segment DHCP Properties - VMware Docs, 2: Create or Modify a Network Segment - VMware Docs, 3: Segment DHCP Config - VMware Docs

https://docs.vmware.com/en/VMware-Cloud-Disaster-Recovery/services/vmware-cloud-disaster-recovery/GUID-11C83D2A-A478-4823-B9B3-275AF6DD31CC.html

A protection group in VMware Cloud Disaster Recovery (VCDR) consists of members (virtual machines or VMs) and policies for snapshots. These policies define the consistent point-in-time copies of the VMs, which are used for disaster recovery. The protection group also includes virtual machine file system (VMFS) datastores, which are used to store the copies of the VMs, and VM customizations, which are used to customize the VMs. Clusters are not part of a protection group in VCDR.

https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-networking-security/GUID-586C053D-9553-461E-B6A8-FF508C8F091C.html

"The VMware HCX on-premises deployment requires five IP addresses: two for the WAN appliance, two for the vMotion feature, and one for the management network." 

In this scenario, the cloud administrator is utilizing the vMotion feature of VMware HCX to migrate several dozen workloads from an on-premises location to a VMware public cloud. They are also stretching three networks for the migration. When using vMotion, two IP addresses will be needed per vMotioned virtual machine: one for the source and one for the target. For the migration of several dozen workloads, this will require several dozens of IP addresses. Additionally, the administrator is also utilizing the capabilities of the WAN appliance to optimize migration traffic. In order to optimize the traffic, one IP address will be needed for the WAN appliance on the on-premises site, and another IP address will be needed for the WAN appliance on the public cloud side. Therefore, the total number of IP addresses that need to be reserved for the on-premises deployment of VMware HCX is the number of IP addresses required for the virtual machines plus one IP address for the WAN appliance on the on-premises site plus another IP address for the WAN appliance on the public cloud side, which totals to five IP addresses.

Hybrid Linked Mode can tolerate a time skew of up to ten minutes between the on-premises data center and the cloud SDDC. The maximum latency between your cloud SDDC and on-premises data center cannot exceed 100 msec roundtrip.

https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vsphere.vmc-aws-manage-data-center-vms.doc/GUID-BE75F0F1-2864-4926-97FE-37E635471C43.html

https://docs.vmware.com/en/VMware-Workspace-ONE-Access/20.10/workspace_one_access_install/GUID-E81B6B1B-A3D1-40D0-806A-3D31502C53A5.html

The Cloud Services Portal communicates with the Workspace ONE Access Connector via port 443 (HTTPS). According to the VMware documentation [1], the Cloud Services Portal connects to the Access Connector on port 443 to authenticate users and authorize access to the cloud service. The Access Connector listens on port 443 and communicates with the Active Directory using LDAP over TLS (LDAPS) on port 636. Reference: https://docs.vmware.com/en/VMware-Workspace-ONE-Access/services/com.vmware.access.admin.configure.doc/GUID-F5C6FD9E-36DA-4B1F-A7E7-CF8F64A81D78.html

Route-based IPSec VPNs provide the flexibility to dynamically learn when new networks are created, making them the ideal choice for establishing connectivity between an on-premises data center and VMware Cloud. Route-based IPSec VPNs use the Border Gateway Protocol (BGP) to dynamically learn and propagate routes over the VPN tunnel, allowing for scalable and secure connectivity. [1]

[1] https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws.networking/GUID-EDA5A6E5-6C5B-4F66-9C2F-2C6D4F6EF8F6.html

Total number of workloads. This determines how many hosts are needed in the VMware Cloud SDDC cluster.

Total amount of available storage across all on-premises datastores. This determines how much storage capacity is needed in the VMware Cloud SDDC cluster.

Average size of workload resources (CPU & RAM). This determines how much compute capacity is needed in the VMware Cloud SDDC cluster.

https://docs.vmware.com/en/VMware-Cloud/services/vmc-cloud-sizer-user/GUID-7CECF719-E56B-4830-84ED-77206A2A118D.html

Based on the given guidelines, the cloud administrator should select the Elastic DRS Baseline policy [1]. This policy is designed to scale the cluster automatically when additional resources are required, while also ensuring that application performance is not affected during the scaling operation. The Elastic DRS Baseline policy also ensures that resources are allocated efficiently and optimally [1], to minimize cost while ensuring that performance requirements are met.

For more information on the Elastic DRS Baseline policy [1], see the VMware official documentation at https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws.sddc-management/GUID-FDD3A8AC-E42C-4B92-9C1D-8EB49D6C7129.html.