VMware Advanced VMware Cloud Foundation 9.0 Operations 3V0-22.25 Exam Dumps: Updated Questions & Answers (May 2026)

The scheduled Reclaim action is created from the snapshot candidates visible at scheduling time, but execution still depends on the valid runtime state of each selected object. VCF Operations Reclaim supports scheduling snapshot reclamation from the Reclaim page; the administrator expands the cluster, selects one or more VMs or snapshots, and uses Schedule Action to run deletion later, with the job managed in Automation Central . The underlying delete snapshot action first retrieves snapshots based on age, then deletes selected snapshots, and the resulting task status is tracked in Recent Tasks . If a user reverts a VM to one of those snapshots before the scheduled job runs, that snapshot becomes part of the VM’s active rollback/current-state chain rather than an unused candidate that should be safely reclaimed. vSphere snapshot behavior requires caution because deleting a snapshot removes the ability to return to that snapshot state, and reverting changes the VM’s active snapshot relationship . Therefore, the reverted snapshot is not deleted, while the rest of the scheduled snapshot deletions can continue. The overall job is expected to finish as partially successful , reflecting that some selected objects were processed while the reverted snapshot was skipped or failed validation. Reference topic: Objective 4.2 – Reclaim Capacity / Snapshot Reclamation / Scheduled Actions / Automation Central .

The three required considerations are data loss, agent reinstallation, and failover/failback downtime. VCF Operations supports Application Monitoring High Availability for collector groups so application monitoring can continue when a cloud proxy or cloud proxy component fails. The documentation states that cloud proxies in an application-monitoring HA collector group operate in a primary-secondary mode . However, existing Telegraf agents cannot simply be converted to HA. To move an existing target machine to application monitoring HA, the administrator must install or reinstall the agent using an application-monitoring HA activated collector group . The same guidance states that adding a cloud proxy currently used by Telegraf agents to an HA activated collector group causes loss of existing application data, so historical application data must be treated as non-preserved during this transition . Finally, HA does not eliminate all interruption: failover or failback has a downtime of three collection cycles , and adding or removing a cloud proxy from the HA collector group also has a three-cycle downtime . Reference topic: Objective 4.7 – Monitor Applications / Product-Managed Telegraf / Application Monitoring High Availability / Collector Groups .

The applied policy is policy 2a because VCF Operations resolves multiple policy assignments by using active policy priority , not by custom group name, policy inheritance tree location, or alphabetical order. The exhibit shows policy 2a as active with priority 1 , policy 1a as active with priority 2 , and policy 2 as active with priority 3 . policy 1 is inactive, so it is not eligible to become the effective policy for the workload. VCF Operations documentation states that policies are applied in priority order as shown on the Active Policies tab, and that priority 1 is the highest priority. It further states that when an object is a member of multiple object groups and each group has a different policy assigned, VCF Operations associates the highest ranking policy with that object . Therefore, even though Workload-01 belongs to all four custom groups, the effective policy is the active policy with the highest rank: policy 2a . Reference topic: Objective 4.5 – Managing VCF Operations with VCF Policy / Policy Hierarchy / Policy Assignment / Active Policy Priority .

Business Applications in VCF Operations are application-centric container objects used to model and monitor the services that support the business. The documentation defines a Business Application as a set of interconnected applications, services, and hosts configured to offer a service to the organization, and also as a collection of interdependent hardware and software components that deliver a specific business capability . Therefore, monitoring the overall health of multiple objects that represent an application and collecting interdependent components together are direct use cases. The Business Applications page displays health in a sortable table, with the application health determined by the aggregated health of underlying objects . VCF Operations also states that after adding a Business Application, administrators can track object health and optimize capacity, cost, and run What-If Analysis on Business Applications . Cost and price analysis also supports container objects such as Business Apps and Custom Groups . Keeping VM cost as low as possible is a general FinOps goal, and unsupported service monitoring with open source Telegraf is an application-monitoring function, not a Business Application use case. Reference topic: Objective 4.7 – Monitor Applications with VCF Operations / Business Applications / Application Health, Cost, and Capacity .

Invoke the process using a VCF Operations API call.

Schedule a job using VCF Operations Automation Central.

The two valid activation methods are to invoke Drift Detection through a VCF Operations API call and to schedule a job using VCF Operations Automation Central . VCF Operations Configuration Drift uses desired-state templates assigned through policy to compare vCenter and vSphere cluster configuration values against approved standards. The VCF 9.0 documentation states that unified configuration management supports scheduled drift detection for vCenter and cluster objects and allows administrators to schedule drift detection through VCF Automation or the VCF Operations orchestrator . The scheduling workflow is performed from Fleet Management > Configuration Drifts > Schedule Drift Detection , where the administrator defines the scope, criteria, and schedule; after creation, VCF Operations creates a new job in Automation Central . API invocation is also valid because VCF Operations exposes fleet and cloud proxy functionality through APIs for automation-driven operations . The GitLab or source-control sync options are not correct because source control synchronizes configuration templates, not the drift detection process itself. Pull requests govern template change review, not drift execution. Reference topic: Objective 4.16 – Monitor Security, Compliance and Configuration / Configuration Drift / Scheduled Drift Detection / Automation Central / API-driven operations

For conservative capacity modelling, the Time Remaining calculation is based on the upper bound projection of capacity utilization . VCF Operations uses its capacity engine to analyze historical utilization and forecast future workload. The engine projects future workload as a range, consisting of an upper-bound projection and a lower-bound projection. The documentation states that capacity calculations are based on time remaining and risk level , and that the capacity engine uses the upper bound projection for a conservative risk level, while an aggressive risk level uses the mean between the upper and lower projections . This behavior is intentionally cautious: conservative modelling assumes the higher side of projected utilization, making resource exhaustion appear sooner and reducing the chance of underestimating future demand. The Time Remaining metric itself represents the number of days until projected utilization crosses the threshold for usable capacity . Therefore, the answer is not based on available-capacity mean, utilization mean, or lower-bound utilization. Those would produce less conservative or different planning outcomes. Reference topic: Objective 4.2 – Manage VCF Capacity / Policy Capacity Settings / Risk Level Configuration / Time Remaining .

The administrator should create a custom group , assign a common tag to the target VMs, and define the group membership criteria based on that tag. This satisfies the requirement for automatic updates because the group must be dynamic rather than manually maintained. VCF Operations supports custom object groups with either manual or dynamic membership. For dynamic groups, VCF Operations discovers objects that match the defined rules and keeps membership current as objects are added, removed, or changed . The custom group workspace allows the administrator to define membership criteria using object type, metrics, relationships, properties, object name, or tag . The documentation specifically identifies tag-based membership criteria as a supported method for creating dynamic custom groups . Because the VMs do not share a naming convention and are on different subnets, object name and network criteria are unsuitable. Adding each VM manually would create a static group, which would not automatically update when the application owner adds or removes VMs. Reference topic: Objective 4.5 – Managing VCF Operations with VCF Policy / Custom Groups / Dynamic Membership / Policy Assignment .

The administrator should model the phased migration by using What-If Analysis workload planning, not migration execution workflows. Because the target workload domain uses vSAN , the correct planning model is the hyperconverged workload-planning workflow, where VCF Operations lets the administrator add or remove VM workloads in a vSAN environment and evaluate the capacity effect on the selected cluster . Each migration phase should be represented as a separate scenario: small VMs, medium VMs, and large VMs. In each scenario, the administrator configures an Application Profile to represent the t-shirt size by defining vCPU, memory, and disk space, then adds the corresponding number of VM workloads for that phase . Since the source vCenter is unmanaged, importing profiles or VM templates directly from the source environment is not the correct method. After the scenarios are created, VCF Operations allows compatible saved scenarios that target the same object to be selected and run together, so the administrator can evaluate the cumulative impact of all planned phases on the target cluster . Reference topic: Objective 4.3 – Forecast VCF Capacity Growth / What-If Analysis / Add VM Workloads / Run Multiple Scenarios Cumulatively .

The administrator must create the scheduled action directly from the Rightsize feature. VCF Operations Rightsize is the capacity-optimization workflow used to adjust CPU and memory allocations for oversized and undersized virtual machines. For oversized VMs, the administrator selects the target VM, opens the resize workflow, reviews the recommended vCPU and memory reduction, and can use the edit controls to modify the recommendation before execution. In this scenario, the default recommendation is a 4 vCPU reduction, but the agreed action is only 50 percent of that value, so the administrator adjusts the reduction to 2 vCPU . The Rightsize page also provides SCHEDULE ACTION , which opens a scheduling dialog so the resize action can run later during the maintenance window; scheduled jobs are then managed through Automation Central . Automation Central is used to manage scheduled jobs, but the rightsizing task is initiated from Rightsize. Reclaim is used for powered-off VMs, idle VMs, snapshots, and orphaned disks, not vCPU rightsizing. vSphere scheduled tasks bypass VCF Operations recommendations. Reference topic: Objective 4.2 – Manage VCF Capacity / Rightsize Workloads / Oversized VMs / Scheduled Actions .

The warnings persist because the issuing certificate chain , not the renewed leaf certificates, is approaching expiration. VCF Operations Fleet Management can view certificate details and certificate alerts across VCF Management and VCF Instance components, including vCenter, NSX Manager, SDDC Manager, ESX, and VCF Operations components . Auto-renewal only renews supported component TLS certificates and occurs 60 days before certificate expiration; it does not renew root certificates . When certificates are issued by an enterprise Microsoft CA, the validity of endpoint certificates is constrained by the validity of the issuing chain. vSphere documentation states that a certificate cannot be renewed with an expiration date beyond the expiration of the trusted root certificate . Therefore, even if the component certificates were recently rotated and the template is configured for one year, the generated certificates may still inherit a shorter effective validity period if the Microsoft CA root or intermediate certificate is expiring soon. The correct remediation is to renew or replace the CA chain, not repeatedly clear alerts or manually renew endpoint certificates. Reference topic: Objective 4.14 – Fleet Management / Certificate Management / Auto-Renewal / CA Chain Validity .