Summer Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: dcdisc65

Page: 1 / 1
Total 10 questions
Exam Code: 5V0-41.20                Update: Oct 16, 2025
Exam Name: VMware SD-WAN Troubleshoot

VMware VMware SD-WAN Troubleshoot 5V0-41.20 Exam Dumps: Updated Questions & Answers (October 2025)

Question # 1

Scenario 3:

After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.

Exhibit.

Users at a remote office are complaining about poor performance with certain applications. The network administrator has already verified the configuration is correct.

Which two parameters should the administrator review to troubleshoot this issue? (Choose two.)

A.

Check the underlay network (bandwidth, latency, jitter, packet loss)

B.

Change the bandwidth measurement under WAN Overlay Advanced Settings

C.

Check the flows to verify which Business Policy the traffic of interest is matching

D.

Look under Monitor, check Business priority tab

Question # 2

Scenario 3:

After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.

Exhibit.

The network administrator has been made aware that Chicago is receiving traffic from non-SD-WAN sites, bottlenecking Chicago's interfaces. The network administrator's VMware SE has mentioned using the uplink feature to help resolve this.

What are two ways the uplink feature should be used in this scenario? (Choose two.)

A.

Set the uplink community to forward traffic to a group of neighbors.

B.

Direct all traffic to that neighbor designated as an uplink,

C.

Stop mutual redistribution of routes from underlay and overlay.

D.

Prevent the site in question from becoming a transit site.

Question # 3

Scenario 1:

A network administrator is tasked! with enabling SO-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites- One is an Internet-only site and two are Hybrid locations with both internet and MPLS: The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.

Exhibit.

An administrator is attempting to activate two Edge devices at the Chicago branch location. The local technician reports that the Edge devices are not coming online. The Edge devices have been plugged in, powered on, and connected to the correct circuits with an Enhanced HA setup.

What should the local technician check first when troubleshooting the issue?

A.

Verify beep sequence of the Edge devices.

B.

Review color of the LED.

C.

Review the Orchestrator for HA misconfiguration issues.

D.

Verify the link light sequence of the HA ports.

Question # 4

Scenario 2:

After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

When checking connectivity from the San Jose branch, all users report that they can reach certain resources at the main data center. They are unable to reach locations elsewhere. The network administrator investigates and first looks at the Overlay Flow Control (OFC) Table.

What should the network administrator look for next to determine what the issue might be?

A.

Check with the local network administrator to see if the routes for the SD-WAN sites are present in San Jose's branch router.

B.

Check Test & Troubleshoot and review a route table dump of the NY hub site.

C.

Check the Global Segment Configuration to see if it has the Routing Flag enabled.

D.

Determine if OSPF has been configured on the MPLS Routers at the hub.

Question # 5

Scenario 3:

After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.

Exhibit.

A network administrator wants to achieve better high-availability and network reconvergence between LAN-side BGP Networks and the hub Edges in New York.

What must the administrator do?

A.

Modify the Keep Alive and Hold timers to the lowest possible values ensuring the Hold timer is 3 times more than the Keep Alive timer.

B.

Nothing, the system will auto-rebalance connections and will provide sub-second convergence.

C.

Modify the Connect and Hold timers to the lowest possible values ensuring the Hold timer is 3 times more than the Connect timer.

D.

Modify the Keep Alive and Hold timers to the lowest possible values ensuring the Keep Alive timer is 3 times more than the Hold timer.

Question # 6

Scenario 3:

After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.

Exhibit.

Users at the Dallas Branch are complaining that downloads/uploads from Office365 are slow. Working in Teams has been providing slow responses. The Internet circuit is 100Mbps while the MPLS Circuit is 45Mbps. Upon troubleshooting, the network administrator has noticed the traffic is Backhauling through the Seattle hub for all internet traffic.

How should the network administrator resolve the issue?

A.

Leave the system as is, the gateways will resolve the issues after doing 15 minutes of link qualification.

B.

Advertise public routes to Office365 and Teams through the New York Hub.

C.

Leave the system as is, the hubs will auto-rebalance tunnels after doing 15 minutes of link qualification.

D.

Prevent the hub from advertising a default route.

Question # 7

Scenario 2:

After completing the branch activation activities for all required branches, the administrator attempts to test connectivity between the various branches and between the hubs and branches- The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

The tunnel from the Dallas site to the Seattle hub is not coming up.

What are two things that should be checked to determine the issue? (Choose two.)

A.

Hub WAN Interface might be behind a firewall.

B.

Spoke Edge and Hub Edge have a mismatched certificate.

C.

Dynamic Branch to Branch is not enabled.

D.

Spoke Edge and Hub Edge are two different Edge models.

Question # 8

Scenario 2:

After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

The SD-WAN Edge at this location has been activated. It is incapable of establishing any overlay tunnels. Due to this being an internet only branch, no underlay connectivity is present to the hubs. The SD-WAN Edge is connected behind a firewall and the security team states that all necessary ports are open.

How can this issue be resolved?

A.

The security team needs to open TCP port 4500 instead of TCP port 2426.

B.

The security team need to open TCP port 2426 outbound but not inbound.

C.

The security team needs to open TCP port 22 instead of TCP port 2426.

D.

The security team needs to open UDP port 2426 outbound and inbound.

Question # 9

Scenario 2:

After completing the branch activation for all required branches, the network administrator attempts to test connectivity between the various branches and between hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the some applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

A technician has added Edges to an East Coast Profile. These Edges are not able to communicate via dynamic tunnels to Edges in the West_Coast profile. The technician has noticed that some Edges are able to establish dynamic tunnels.

What could be preventing Edges from being able to establish dynamic tunnels?

A.

The profiles are not configured to allow dynamic branch to branch VPNs.

B.

The profiles are configured to only allow dynamic branch to branch for Edges within the same profile.

C.

None of the existing profiles have Cloud VPN enabled thus preventing dynamic tunnels.

D.

Neither profile has been configured to utilize cloud gateways.

Question # 10

Scenario 2:

After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

A network administrator is investigating connectivity issues between Chicago and San Jose. The administrator browses to the Overlay Flow Control (OFC) window and notices that the screen is blank with no routes shown in the OFC.

What is a possible reason for this?

A.

Cloud VPN for the Edges / Profiles is not enabled.

B.

There is an invalid MTU configuration at Chicago.

C.

OSPF or BGP is not enabled.

D.

The routing table on the Edges has not been initialized.

Page: 1 / 1
Total 10 questions

Most Popular Certification Exams

Payment

       

Contact us

dumpscollection live chat

Site Secure

mcafee secure

TESTED 16 Oct 2025