CompTIA CompTIA Network+ Certification Exam N10-009 Exam Dumps: Updated Questions & Answers (July 2026)

A warm site typically has a full infrastructure ready, but it lacks the most up-to-date data or is not immediately operational. It requires some configuration or data restoration to become fully functional.

=================

Direct Connect refers to a dedicated network connection between an on-premises network and a cloud service provider (such as AWS Direct Connect). This link bypasses the public internet, providing a more reliable and higher-bandwidth connection. It may not inherently include encryption because it relies on the security measures of the dedicated physical connection itself. In contrast, other options like VPN typically involve encryption as they traverse the public internet.

Bottlenecking occurs when a device in the network (such as an IPS) cannot process traffic efficiently, resulting in a dramatic drop in throughput. The significant difference between the firewall ' s speed (48.8 Mbps down) and the end-user devices’ speeds (4.8 - 5.2 Mbps down) indicates a bottleneck caused by the IPS.

•Why not the other options?

•Packet loss (A) – Would typically cause connection timeouts, not just slow speeds.

•Channel overlap (C) – Affects only wireless networks, but the wired desktop is also experiencing slow speeds.

•Network congestion (D) – Would show fluctuations in both upload and download speeds, but upload speeds remain unaffected.

Multimode fiber optic cables involve the transmission of light signals that bounce off the core ' s cladding as they travel down the fiber. This characteristic differentiates it from single-mode fiber, where the light travels directly down the fiber without reflecting off the cladding.

Here are some detailed points about multimode fiber cables:

Construction: Multimode fibers have a larger core diameter, typically 50 or 62.5 microns, compared to single-mode fibers, which have a core diameter of about 9 microns.

Light Propagation: The larger core of multimode fiber allows multiple light modes to propagate. These modes travel at different angles, leading to reflections off the core-cladding boundary.

Distance and Bandwidth: Due to modal dispersion, where different light modes arrive at the receiver at different times, multimode fibers are suited for shorter distance applications compared to single-mode fibers. Typical distances are up to 550 meters for 10 Gbps Ethernet using OM4 multimode fiber.

Applications: Multimode fibers are commonly used in LANs (Local Area Networks), data centers, and for shorter distance data transmission due to their cost-effectiveness and ease of installation.

Network References:

CompTIA Network+ N10-007 Official Certification Guide, which covers fiber optic technologies, including the differences between multimode and single-mode fibers.

Cisco Networking Academy: Provides training materials and reference guides on the properties of different fiber optic cables.

Fiber Optic Association (FOA): A professional society dedicated to fiber optics, offering extensive information and certification on fiber optic technologies.

Multimode fibers are specifically designed for short-range communication with higher data rates and are typically used in environments like data centers, where high bandwidth over shorter distances is crucial. The reflections off the cladding, inherent to multimode fiber, facilitate this high-capacity communication.

A content filter blocks access to specific websites based on category, URL, or keywords. This is the best solution to restrict gambling websites.

Breakdown of Options:

A. ACLs – Control network access, not specific web content.

B. Content filter – ✅ Correct answer. Used to block access to unwanted websites.

C. Port security – Prevents unauthorized device connections, not web traffic filtering.

D. Screened subnet – A DMZ isolates public-facing servers, not user restrictions.

802.1X is a port-based network access control (PNAC) protocol that provides an authentication mechanism to devices wishing to connect to a LAN or WLAN. It is widely used for secure network access, ensuring that only authenticated devices can access the network, whether they are connecting via wired or wireless means. 802.1X works in conjunction with an authentication server, such as RADIUS, to validate the credentials of devices trying to connect.References: CompTIA Network+ study materials.

The correct answer is C. Address pool exhaustion. The laptop has assigned itself an address in the 169.254.x.x range, which is an APIPA address. That happens when the device is configured to use DHCP but cannot successfully obtain an address lease from a DHCP server. The missing default gateway and DHCP server entries support that conclusion.

Among the choices, the most likely reason is that the DHCP scope has run out of available addresses. When the pool is exhausted, new clients cannot receive a valid IP configuration and fall back to an automatic private address. As a result, the laptop will not be able to reach internal company resources like the intranet because it is not properly configured for the network.

The other answers do not fit the evidence. A short DHCP lease duration may cause more frequent renewals, but it does not directly explain the self-assigned APIPA address. An IIS server malfunction would affect the web service itself, not the client’s local IP configuration. An IDS misconfiguration also would not normally result in a 169.254 address on the host.

The output clearly indicates a DHCP assignment failure, and from the options provided, address pool exhaustion is the best match.

Spanning Tree Protocol (STP) uses bridge priority values to determine the root bridge in a switched network topology. Correctly configuring bridge priority helps in maintaining a loop-free and efficient network. The document explains:

“Spanning Tree Protocol (STP) uses bridge priority values to determine which switch will be the root bridge, ensuring loop prevention and efficient path selection within the network.”

Role of an Access Point (AP):

Wireless to Wired Conversion: An access point (AP) is a device that allows wireless devices to connect to a wired network using Wi-Fi. It converts wireless signals (radio waves) into electronic signals that can be understood by wired network devices.

Functionality:

Signal Conversion: The AP receives wireless signals from devices such as laptops, smartphones, and tablets, converts them into electronic signals, and transmits them over the wired network.

Connectivity: APs provide a bridge between wireless and wired segments of the network, enabling seamless communication.

Comparison with Other Devices:

Router: Directs traffic between different networks and may include built-in AP functionality but is not primarily responsible for converting wireless to electronic signals.

Firewall: Protects the network by controlling incoming and outgoing traffic based on security rules, not involved in signal conversion.

Load Balancer: Distributes network or application traffic across multiple servers to ensure reliability and performance, not involved in signal conversion.

Deployment:

APs are commonly used in environments where wireless connectivity is needed, such as offices, homes, and public spaces. They enhance mobility and provide flexible network access.

ESP (Encapsulating Security Payload) is an IPsec protocol that provides encryption, integrity, and authentication for data inside a VPN tunnel. It ensures that all tunneled traffic is encrypted.

B. SSH secures remote terminal sessions, not site-to-site VPN tunnels.

C. GRE (Generic Routing Encapsulation) provides encapsulation but does not encrypt data.

D. IKE (Internet Key Exchange) negotiates keys and establishes the IPsec tunnel but does not encrypt the payload itself.

References (CompTIA Network+ N10-009):

Domain: Network Security — VPN protocols, IPsec (AH vs. ESP), encryption in transit.

The correct answer is B. Network. In the OSI model, packets are the protocol data unit associated with Layer 3, which is the Network layer. This is the layer where logical addressing and routing functions take place, and it is the layer most closely associated with devices such as routers and Layer 3 switches.

The question is specifically asking about troubleshooting an issue related to packets, not frames, segments, or bits. That wording matters because each OSI layer has its own PDU name. Transport uses segments, Data Link uses frames, and Physical deals with bits and the actual transmission medium. Since packets belong to Layer 3, the technician would most likely be interacting with devices and functions at the Network layer.

This is a common CompTIA style concept check. Students are expected to know the mapping between OSI layers and PDUs, along with the kinds of devices that operate at each layer. When the problem involves routing paths, IP addresses, or packets moving between networks, the best answer is usually the Network layer. That is why B is correct.

A honeynet is a network of honeypots designed to attract and study attackers. Honeypots are decoy systems set up to lure cyber attackers and analyze their activities. A honeynet, being a collection of these systems, provides a broader view of attack methods and patterns, helping organizations improve their security measures. References: CompTIA Network+ Exam Objectives and official study guides.

The Network layer (Layer 3 of the OSI model) can utilize the connectionless protocol IP (Internet Protocol) to send data packets independently without establishing a connection. This approach is typical for protocols like IP, which provide best-effort delivery rather than guaranteed delivery. The document explains:

“The OSI Network Layer is responsible for logical addressing and routing, and it can utilize connectionless protocols like IP to send packets without requiring a session setup. This layer does not guarantee packet delivery, relying on higher layers for error detection or correction if needed.”

When installing equipment in a building, environmental factors are critical to ensure the safety and longevity of the equipment. A fire suppression system is essential to protect the equipment from fire hazards. Humidity control is crucial to prevent moisture-related damage, such ascorrosion and short circuits, which can adversely affect electronic components. Both factors are vital for maintaining an optimal environment for networking equipment.References: CompTIA Network+ study materials.

To support 126 users, the subnet must provide at least 126 usable host addresses. In IPv4 subnetting, usable hosts are calculated as: (2^(host bits)) − 2, subtracting the network and broadcast addresses.

A /25 leaves 7 host bits (because 32 − 25 = 7). That yields 2^7 = 128 total addresses, and 128 − 2 = 126 usable—an exact fit and therefore the most efficient option listed.

A /24 provides 256 total addresses and 254 usable, which would waste more addresses than necessary. A /23 provides 512 total addresses and 510 usable—far more waste. A /26 leaves 6 host bits, giving 64 total addresses and 62 usable, which is not enough for 126 users.

The 10.2.2.0 address is within the private 10.0.0.0/8 range, so it’s appropriate for internal addressing. Therefore, 10.2.2.0/25 is the correct CIDR range for efficiently supporting 126 hosts.